Publications

List of Publications

Teacher	Title	Read More
SALEM DAUD SALEM NIJMEH	A. Al-Sarkhi, B. Akash, E. Abu-Nada, S. Nijmeh, I. Al-Hinti, “Prospects of geothermal energy utilization in Jordan”. Energy Sources, Part A, (2008), 30 (17), 1619-1627 A. Al-Sarkhi, E. Abu-Nada, S. Nijmeh, B. Akash, “Performance evaluation of standing column well for potential application of ground-source heat pump in Jordan”. Energy Conversion & Management Journal, (2008), 49 (4), 863-872 Bilal A. Akash, S. Nijmeh, S. Odeh, “Effective thermal conductivity measurement of soils at various moisture contents”. International Conference on Recent Advances in Mechanical & Materials Engineering, (2005), Kuala Lumpur, Malaysia. S. Nijmeh, S. Odeh, B. Akash, “Experimental and Theoretical Study of a Single Basin Solar Sill In Jordan”, International Comm. Heat Mass Transfer, (2005), 32, 565-572. S. Nijmeh, S. Odeh, 2004, " Design and Testing of a Stand Alone Parabolic Solar Collector for Process Heat Applications', World Conference On Energy for Sustainable Development, December 6-9, 2004, Cairo, Egypt. R. Mamlook, S. Nijmeh, 2004, "Evaluation of Electricity Power Production System Options Using Fuzzy Sets Methodology", Middle East Multiconference on Simulation and Modelling, MESM'2004, September 14-16,2004, Philadelphia University, Amman, Jordan. S. Odeh ,S. Nijmeh , M. S. Ashhab, Y. Zakaria, A. Amra, 2004 , “Design of a Single-Axis Tracking Parabolic Collector for Moderate Temperature Applications", The 5th ISES Europe Solar Conference, EuroSun2004, pp.527-532 Freiburg- Germany. S. Odeh, S. Nijmeh, B. Akash, 2004 , “Performance Evaluation of Solar-Assisted Double-Tube Evaporator Heat Pump System”. International Communications in Heat and Mass Transfer, Elsevier Science, 2, 191-200. S. Nijmeh, S. Abdallah, 2004, “ Two Axis Sun-Tracking System with PLC Control”, Energy Conversion & Management, Elsevier Science, 45(11-12) , 1931-1939. R. Mamlook, S. Nijmeh, S. Abdallah, 2003, " Sun Tracking Programmable Logic Control System", International Arab Conference on Information Technology, ACIT'2003, Arab Academy for Science and Technology and Maritime Transport, Alexandria, Egypt. S. Odeh, S. Nijmeh, B. Akash, 2003, Evaluation of Solar-Assisted Heat Pump with Concentric Pipe Evaporator, 3rd IASTED International Conference on Power and Generation Systems, pp.248-251, Marbella-Spain. S. Abdallah, S. Nijmeh, 2002, “ Design, Construction and Operation of One Axis Sun-Tracking System with PLC Control”, Jordan Journal of Applied Science, 4, 45-53. S. Abdallah, S. Nijmeh, 2002, “ One Axis Sun-Tracking System with PLC Control in Amman, Jordan”, Proceedings of the Renewable Energy Congress VII, Cologne, Germany. S. Nijmeh, N. Baker, 2000, “ Bioclimatic Design Strategies for Buildings in Amman, Jordan”, Proceedings of the World Renewable Energy Congress VI, Brighton, U.K. R. Mamlook, S. Nijmeh, Bilal A. Akash, 2000, “Evaluation of solar energy Systems Using Fuzzy Sets Programming”, Proceedings of International Conference on Energy Systems 2K, Amman, Jordan. S. Nijmeh, R. Mamlook, 2000, “ Testing of Two Models for Computing Global Solar Radiation on Tilted Surfaces ”, Renewable Energy, 20(1), 75-81. S. Nijmeh, R. Mamlook, 1999, “ Comparison of Computational and Measured Values of Total Radiation on 45 Inclined Surface for Amman ” Proceedings of the Third Jordanian Mechanical and Industrial Engineering Conference, Amman, Jordan. S. Nijmeh, A. Sayigh, 1989, “ Solid Absorption System for Solar Cooling in Jordan”, Proceeding of JITH 89, Alger, Algeria. S. Nijmeh, A. Sayigh, 1988, “ The Use of Bioclimatic Charts to Evaluate The Heating Load in Buildings of Northern Climate Countries ”, Proceedings of North Sun 88 – Solar Energy at High Latitudes, Borlange, Sweden
MOH'D SAMI SH. SALIM ASHHAB
ALI MOHAMMAD ALI JAWARNEH	PUBLICATIONS: JOURNAL PAPERS 1- Ali M. Jawarneh, Mohamad Al–Widyan, Zain Al-Mashhadani, “Experimental Study on Heat Transfer Augmentation in a Double Pipe Heat Exchanger Utilizing Jet Vortex Flow”, Heat Transfer, first published: 15 September 2022. 2022;1-16. https://doi.org/10.1002/htj.22696 2- Ali M. Jawarneh, Faris M. AL-Oqla, Anas Abu Jadoo, “Transient behavior of non-toxic natural and hybrid multi-layer desiccant composite materials for water extraction from atmospheric air”, Environmental Science and Pollution Research, Sep;28(33):45609-45618. EPub. 19 April 2021. 3- A. AL-Migdady, Ali. M. Jawarneh, A. K. Ababneh, H. N. Dalgamoni “Numerical investigation of the cooling performance of PCM-based heat sinks integrated with metal foam insertion”, Jordan Journal of Mechanical and Industrial engineering, JJMIE, June 2021, 15(2), pp. 191-197. 4- Etier I., Al-Labadi M.N., Ali. M. Jawarneh, Hammad B., Kannan N, “Real time analysis model of single action tracker, duel axis solar tracker and fixed mounting of the photovoltaic system”, Journal of Green Engineering, 2020, 10(11), pp. 12439–12455. 5- Ahmad K AL-Migdady, Ali M Jawarneh, Hussein N Dalgamoni, Mohammad Tarwaneh, “Combined Effects of Eccentricity and Internal Fins on the Shell and Tube Latent Heat Storage Systems”, International Journal of Recent Technology and Engineering (IJRTE), ISSN: 2277-3878, Volume-9 Issue-1, May 2020, pp 230-236. 6- Hitham Tlilan, Mohammad Gharaibeh, Manal Mustafa, Jawarneh A.M, “Effect of Stress Triaxiality on The Strain”, International Journal of Recent Technology and Engineering (IJRTE), Volume-8 Issue-4, November 2019, pp. 3468-34-74. 7- Ahmad Al-Migdady, Jawarneh A.M, Amer Ababneh, Mohammad Tarwaneh, “Molecular Dynamics Simulation of Smooth and Rough Nano-Channels using Short Range Attractive Potential”, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 61, Issue 2 (2019), pp. 282-296. 8- Tarawneh M, Jawarneh A.M, Tlilan H, Ababneh A, Al-Migdady A “Investigation of the effect of superheating on the performance of a refrigeration system using low temperature different refrigerant blends in porous media”, Heat Transfer—Asian Research, 2019;48:2216-2236. 9- Ababneh A, Jawarneh A.M, Jaber S, “Direct vaporization of organic fluid in parabolic trough collector for solar power generation”, International Review of Mechanical Engineering, Vol 13, No 9 (2019), pp. 493-503. 10- Ababneh A, Jawarneh A.M, Tlilan H, Al-Migdady A, “Enhancement utilization of solar energy for the application of seawater desalination”, International Journal of Applied Engineering Research (IJAER), Volume 14, Number 5 (2019) pp. 1126-1134. 11- Jawarneh A.M, Ahmad Al-Migdady, Amer Ababneh, Hitham Tlilan, Mohammad Tarawneh “Printed Circuit Board (PCB) Cooling by Using the Swirl Flow Technology”, International Journal of Applied Engineering Research (IJAER), Vol 14, No. 2 (2019) pp. 410-414. 12- Hitham M. Tlilan, Jawarneh A.M, Amer Ababneh, Mohammad Tarawneh, Mahmoud Rababah, Othman A. Smadi, “Strain-Concentration Factor of Internally Pressurized Thick-Walled Cylinders”, International Journal of Applied Mechanics and Engineering, Vol. 24, no. 1, 2019, pp. 143-159. 13- Ababneh A , Hijazin A, Jawarneh A.M. “A novelty for thermal energy storage utilizing the principle of solid to solid phase change in a lithium sulfate at elevated temperatures”, Solar Energy, Vol. 163, 15 March 2018, pp. 45-53. 14- Jawarneh A.M, Al-Widyan M., Al-Migdady A., Tlilan H.,Tarawneh M., and Ababneh A. “Double vortex generators for increasing the separation efficiency of the air separator”, International Journal of Heat and Technology (IJHT), Vol. 35, No. 3, September 2017, pp. 529-538. 15- Ababneh A., Jawarneh A.M, Al Tarawneh M., Tlilan H., and Dui? N. "Evaluation of Solar Parabolic Trough Collector for the Application of Seawater Desalination" International Review of Mechanical Engineering, vol. 10, no. 6, 2016, pp. 443-451. 16- Tarawneh M., Alshiqirate A.S., Jawarneh A.M, “Effect of Darcy, Reynolds, and Prandtl Numbers on the Performance of Two-Phase Flow Heat Exchanger Filled with Porous Media”, Heat Transfer- Asian Research, vol.43, no.8, 2014, pp. 749-758. 17- Jawarneh A.M, “Investigation of the Flow Characteristics in a Sink-Swirl Flow within Two Disks”, International Review of Mechanical Engineering, vol. 7, no. 6, 2013, pp. 1031-1036. 18- Jawarneh A.M, Al-Tarawneh M, Ababneh A.K, Tlilan H, “Solar Energy Availability on Horizontal and Tilted Surfaces: a Case Study”, International Review of Mechanical Engineering, vol. 6, no. 4, 2012, pp. 901-917. 19- Jawarneh A.M, “Heat Transfer Enhancement in a Narrow Concentric Annulus in Decaying Swirl Flow”, Heat Transfer Research, vol. 42, no. 3, 2011, pp. 199-216. 20- Ababneh A.K, Jawarneh A.M, Tlilan H, Ababneh M.K, “The Effects of the Secondary Fluid Temperature on the Energy Transfer in an Unsteady Ejector with a Radial-Flow Diffuser”, Heat and Mass Transfer, vol. 46, no.1, 2009, pp. 95-105. 21- Al-shyyab A, Alwidyan K., Jawarneh A.M, Tlilan H, “Non-linear Dynamic Behaviour of Compound Planetary Gear Trains: Model Formulation and Semi-Analytical Solution”, Proc. IMechE, Part K: Journal of Multi-body Dynamics, vol. 223, no.3, 2009, pp. 199-210. 22- Jawarneh A.M., Al-Shyyab A, Tlilan H, Ababneh A, “Enhancement of a cylindrical separator efficiency by using double vortex generators”, Energy Conversion and Management, vol. 50, issue 6, 2009, pp.1625-1633. 23- Ababneh A.K., Garris C.A., Jawarneh A.M, Tlilan H.,” Investigation of the Mach number effects on fluid-to fluid interaction in an unsteady ejector with a radial-flow diffuser”, Jordan Journal of Mechanical and Industrial Engineering, vol. 3, no. 2, 2009, pp. 131-140. 24- Tlilan H.M, Jawarneh A.M, Al-Shyyab A.S,” Strain-concentration factor of cylindrical bars with double circumferential U-notches under static tension”, Jordan Journal of Mechanical and Industrial Engineering, vol. 3, no. 2, 2009, pp. 97-104. 25- Jawarneh A.M., Tlilan H., Al-Shyyab A., Ababneh A., " Strongly Swirling Flows in a Cylindrical Separator," Minerals Engineering, vol. 21, issue 5, 2008, pp. 366-372. 26- Jawarneh A.M, Vatistas G.H, Ababneh A., " Analytical Approximate Solution for Decaying Laminar Swirling Flows within a Narrow Annulus", Jordan Journal of Mechanical and Industrial Engineering (JJMIE), vol. 2, no. 2, 2008, pp. 101-109. 27- Tlilan H.M, Al-Shyyab A.S, Jawarneh A.M, Ababneh A.K," Strain-Concentration Factor of Circumferentially V-Notched Cylindrical Bars under Static Tension", Journal of Mechanics, vol. 24, no.4, 2008, pp. 419-427. 28- Jawarneh A.M., Sakaris P., and Vatistas G.H, "Experimental and Analytical Study of the Pressure Drop Across a Double-Outlet Vortex Chamber", Transaction of the ASME, Journal of Fluids Engineering, vol. 129, issue 1, 2007, pp. 100-105. 29- Jawarneh A.M. and Vatistas G.H “Reynolds Stress Model in the Prediction of Confined Turbulent Swirling Flows”, Transaction of the ASME, Journal of Fluids Engineering, vol. 128, issue 6, 2006, pp.1377-1382. 30- Jawarneh A.M., Vatistas G.H., Aboelkassem Y.,” Experimental Investigation of the Pressure Drop in a Sink-Swirl Flow within Two Disks”, AIAA, Journal of Propulsion and Power, vol. 21, no. 4, 2005, pp. 759-760. 31- Jawarneh A.M., and Vatistas G.H.,” The Effect of Inlet Conditions on the Pressure Drop in a Confined Vortex Chamber”, AIAA, Journal of Propulsion and Power, vol. 21, no.6, 2005, pp. 1128-1133. 32- Jawarneh A. M., Vatistas G.H. and Hong H., “On the Flow Development in Jet-Driven Vortex Chambers”, AIAA, Journal of Propulsion and Power, vol. 21, no. 3, 2005, pp. 564-570. 33- Vatistas G.H., Jawarneh A.M., and Hong H., “Flow Characteristics in a Vortex Chamber”, The Canadian Journal of Chemical Engineering, vol. 83, no. 3, 2005, pp. 425-436. PUBLICATIONS: CONFERENCE PAPERS 1- Jawarneh A.M, Beam and Diffuse Solar Energy in Zarqa City, International Conference on Thermal Engineering, World Academy of Science, Engineering and Technology (WASET) 64, 2012, Paris, France, April 25-26, 2012. 2- Jawarneh A.M and Al-Shyyab A.S, “Potential of Solar Energy in Zarqa Region”, International Conference on Energy and Environment, World Academy of Science, Engineering and Technology (WASET) 76, 2011, Venice, Italy, April 27-29, 2011. 3- Jawarneh A.M, Issa Etier, and Salem Nijmeh, “Availability of Solar Energy in Hashemite University”, International Conference and Exhibition on Green Energy & Sustainability for Arid Regions & Mediterranean Countries (ICEGES 2009), Le Royal Hotel Amman, Jordan, November10-12, 2009. 4- Tlilan H.M, Al-shyyab A.S, and Jawarneh A.M., “Interference Effect on Strain-Concentration Factor of Cylindrical Bars with Double Circumferential U-notches under Static Tension”, 6th International Conference on Mechanics of Time-Dependent Materials, Hall, R.B., Lu, H. and Qi, H. J., eds., Mar 30 - Apr 4, 2008, Monterey, CA. 5- Jawarneh A.M., “Heat Transfer Enhancement in Swirl Annulus Flows”, Proceedings of 5th WSEAS International Conference on Environment, Ecosystems and Development (EED' 07), Tenerife, Spain, December 14-16, 2007. 6- Jawarneh A.M., and Al-Sarkhi A., “Design and Simulation of Vortex Cylinder Separator”, Proceedings of the Third International Conference on Thermal Engineering: Theory and Applications (ICTEA), May 21-23. 2007, Amman, Jordan. 7- Jawarneh A.M., and Vatistas G.,”Experimental and Numerical Study of Turbulent Confined Swirling Flow”, Proceeding of the Second International Exergy, Energy and Environment Symposium (IEEES2) conference, paper no. IEEES2-197, 3-7 July 2005, Kos, Greece. 8- Jawarneh A.M., Vatistas G., and Aboelkassem Y.,”Effect of Vortex Generators in Confined Swirl Flow”. AIAA, 35th AIAA Fluid Dynamics Conference and Exhibit, Toronto, Ontario, paper no. AIAA-2005-4651, Jun. 6-9, 2005. 9- Aboelkassem Y., Vatistas G. and Jawarneh A.M.“Viscous Dissipation Model for Monopolar- Like Vortices”, Euromech 448 conference, Vortex dynamics and fields interactions, Paris, France, Sep. 6 -10, 2004. 10- Jawarneh A.M., and Vatistas G., “Vortex Chamber Flows”, AIAA 2nd International Energy Conversion Engineering Conference, Providence, Rhode Island, paper no. AIAA-2004-5620, Aug. 16 -19, 2004.
HITHAM MAHMMOUD NASER TLILAN	(1) Hitham M. Tlilan, S. Yousuke, T. Majima, “Strain-concentration factor of shallow circumferential notches”. JSME conference 53 No. 43-1, Japan, 2004 (2) Hitham Mahmmoud Tlilan, Naoki Sakai, Majima Tamotsu, “Strain-concentration factor of a single-edge notch under pure bending”. (In Japanese) Yamanashi District Conference, No. 040-4, Japan, October 10th 2004 (4) Hitham M. Tlilan, Sugawara Yousuke, Majima Tamotsu, “Effect of notch depth on strain-concentration factor of notched cylindrical bars under static tension. European Journal of Mechanics A / Solids, 24 (3), 406-416, 2005 www.sciencedirect.com (5) Hitham . M. Tlilan, N. Sakai and T. Majima, “Strain-concentration factor of rectangular bars with a single-edge notch under pure bending”. (In Japanese), Journal of the Society of Materials Science, 54 (7), 2005 (6) Hitham . M. Tlilan, N. Sakai and T. Majima, “Effect of notch depth on strain-concentration factor of rectangular bars with a single-edge notch under pure bending”, International Journal of Solids and Structures, 43, 459–474, 2006, www.sciencedirect.com (6)Hitham M. Tlilan, Ahmad S. Al-Shyyab, Tariq Darabseh, Majima Tamotsu." Strain-concentration factor of notched cylindrical austenitic stainless steel bar with double slant circumferential u-notches under static tension". Jordan Journal of Mechanical and Industrial Engineering, Volume 1, Number 2, Dec. 2007,Pages 105 - 111 (7)Jawarneh A.M., Tlilan H., Al-Shyyab A., Ababneh A., " Strongly Swirling Flows in a Cylindrical Separator ," Minerals Engineering, (2007), In Press. Available on Line. (8)H. M. Tlilan, A. S. Al-Shyyab, A. M. Jawarneh, A. K. Ababneh, “Strain-concentration factor of circumferentially V-notched cylindrical bars under static tension”, Accepted, Journal of Mechanics (9)Jawarneh A. M., Ahmad S. Al-Shyyab and Hitham M. Tlilan, " Flow Characteristics in a Sink-Swirl Flow within Two Disks", Computers and Fluids, Submitted (2007) (10)Hitham M. Tlilan, Ahmad S. Al-Shyyab, Ali M. Jawarneh."Interference effect on strain-concentration factor of cylindrical bars with double circumferential u-notches under static tension" Accepted, MTDM Conference 2008, Mechanics of Time Dependent Materials Conference March 30 - April 4, 2008 ~ Monterey, California,USA
AMER KHALIL DAWOOD ABABNEH
AHMAD KHALED NAYEL ALMIGDADY	[1] A. Al-Qananwah, J. Koplik and Y. Andreopoulos, “Shock Wave Interactions with Nano-structured Materials: a Molecular Dynamics Approach” Shock waves, Springer, July, 2012, DOI: 10.1007/s00193-012-0397-4. [2] A. Al-Qananwah, J. Koplik and Y. Andreopoulos, “Molecular Dynamics Simulation of Shock Waves Interacting with Nano-structures”, 62nd Annual Meeting of the APS Division of Fluid Dynamics, Volume 54, Number 19 , Sunday–Tuesday, November 22–24, 2009; Minneapolis, Minnesota. [3] A. Al-Qananwah, J. Koplik and Y. Andreopoulos, “Attenuation of shock waves through nano-structured porous material” , Physics of Fluids 25, 076102 (2013); doi: 10.1063/1.4811720
MOHAMMAD ABDEL AZIZ JUM'AH ALTARAWNEH	Alshqirate, A. Tarawneh, M. and Hammad, M. "Cooling of superheated refrigerants flowing inside tubes filled with porous media, study of heat transfer and pressure drop, CO2 case study" has been accepted by the Journal of Energy And Power Engineering". 2. Alshqirate, A. Hammad, M and Tarawneh, M."Cooling of super heated refrigerants flowing inside mini and micro tubes, study of heat and pressure drop, CO2 case study" has been accepted by Jordan Journal of Mechanical and Industrial Engineering(JJMIE). 3. Tarawneh, M. Alshqirate, A. and Hammad, M. "Heating of subcooled refrigerants flowing inside tubes filled with porous media, study of heat transfer, CO2 case study" Int. J. of Thermal & Environmental Engineering Volume 3, No. 2 (2011) 121-124 . 4. Tarawneh, M Alshqirate, A and Hammad, M." Study of heat transfer and pressure drop during condensation and evaporation processes in porous media, using experimental work and dimensional analysis. Case study of Carbon Dioxide (CO2)". Journal of Porous Media and is scheduled to appear in Volume 14 (2011). 5. Tarawneh, M. Alshqirate, A. and Hammad, M. "Heating of subcooled refrigerants flowing inside tubes filled with porous media, study of heat transfer, CO2 case study" International conference on energy &water and environment.Amman-Jordan,2011". 6. Alshqirate, A. Tarawneh, M. and Hammad, M."The effect of heat exchanger size on two phase heat transfer coefficient, CO2 case study. has been accepted for presentation at the 23rd International Congress of Refrigeration from (21-26) August 2011. Czech Republic. 7. Alshqirate, A. Tarawneh, M. and Hammad, M. "Dimensional analysis and empirical correlations for heat transfer and pressure drop in condensation and evaporation processes of carbon dioxide (CO2) flow inside micro pipes. Case Study of Carbon Dioxide (CO2)" Under preparation. 8. Hammad, M. Tarawneh, M. and Alshqirate, A." Simple Correlation Equations of Heat Transfer Coefficient during Phase Change for Flow inside Tubes filled with porous media. CO2 case study." Under preparation 9. Tarawneh, M " Generalized correlation for the condensation and evaporation heat transfer coefficient of propane (R290), Butane (R600),R 134a ,R744 and R407c in porous horizontal tubes: Experimental investigation. Under preparation.
AHMAD IBRAHIM AHMAD BANI YASEEN	1. Yaseen, A. B., & Duwairi, H. M. (2020). Modeling of liquid film condensation in saturated porous medium using forchheimer's model. Special Topics & Reviews in Porous Media: An International Journal, 11(2). 2. Omari, M. A., Almagableh, A., Sevostianov, I., & Yaseen, A. B. (2020). Modeling of the viscoelastic properties of thermoset vinyl ester nanocomposite using artificial neural network. International Journal of Engineering Science, 150, 103242. 3. Ahmad Bani Yaseen, Laith Al-Hyari, Omar Almahmoud & Mahmoud Hammad (2020). Performance of a new solar water heater design with natural circulation, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, DOI: 10.1080/15567036.2020.1785590
RAMI AHMAD MOHAMMAD AL-JARRAH	1- Faris M. AL-Oqla and Rami AL-Jarrah, A novel adaptive neuro-fuzzy inference system model to predict the intrinsic mechanical properties of various cellulosic fibers for better green composites, Cellulose volume 28, pages 8541–8552 (2021). 2- Rami AL-Jarrah, Intelligent Vision-Based Real-Time Detection for Rough Terrain Navigation Robot, accepted to publish at Mechanical Engineering and Robotics Research Journal, 2021. 3- Rami AL-Jarrah, Hybrid Fuzzy-PID Closed Loop to regulate Quadcopter System, accepted to publish at Mechanical Engineering and Robotics Research Journal, volume 10, No. 9, September 2021. 4- Hitham Tlilan, Rami AL-Jarrah, Design a Vest using Embedded System for Human Body Vibrations Measurements, International Journal of Control and Automation, Vol. 13, No.1, (2020), pp. 295 – 307, 2020. 5- Rami AL-Jarrah, Hitham Tlilan, Ayat Al-Jarrah, Bounded Interval Fuzzy Control for Half Vehicle’s Active Suspension System, International Journal of Recent Technology and Engineering (IJRTE), Volume-8, Issue-3, September 2019. 6- Rami Al-Jarrah, Mohammad Al-Jarrah, and Hubert Roth, A Novel Edge Detection Algorithm for Mobile Robot Path Planning, Journal of Robotics, pp. 1-13, 2018. 7- Mohammad A. Al-Jarrah, Rami Al-Jarrah, Nedal Al-Ababneh, Decision fusion in mobile wireless sensor networks using cooperative multiple symbol differential space time coding. International Journal of Electronics and Communications (AEU), vol. 80, pp. 127–136, 2017.
FARIS MOHAMMED-KHAIR FARIS AL-OQLA	Chapters in Books: 1. Faris M. AL- Oqla, O.Y. Alothman, M .Jawaid, S.M. Sapuan, M. H. Es-Saheb, "Processing and Properties of Date Palm Fibers and Its Composites". In Biomass and Bioenergy 1-25, 2014. Springer International Publishing. Journals 1. Faris M. AL- Oqla, S. M. Sapuan, M. R. Ishak, N. A. Aziz, "Predicting the potential of agro waste fibers for sustainable automotive industry using a decision making model", Computers and Electronics in Agriculture. Vol 113, 116-127, 2015. Q1 Journal, I.F = 1.486. 2. Faris M. AL- Oqla, S. M. Sapuan, Anwer, T., Jawaid M, and Hoque, M.E. "Natural fiber reinforced conductive polymer composites as functional materials: A review". Synthetic Metals. Vol 206, 42-54, 2015. ISI, Q2 Journal, I.F = 2.222 3. Faris M. AL- Oqla, S. M. Sapuan, M. R. Ishak, N. A. Aziz, " A novel evaluation tool for enhancing the selection of natural fibers for polymeric composites based on fiber moisture content criterion". BioResources, Vol. 10 (1), 299-312, 2015. Q1 Journal, I.F = 1.549. http://152.1.0.246/index.php/BioRes/article/download/BioRes_10_1_299_Al_Oqla_Novel_Evaluation_Polymeric_Composites/3204 4. Faris M. AL- Oqla, S. M. Sapuan, M. R. Ishak, N. A. Aziz, “A decision-making model for selecting the most appropriate natural fiber – polypropylene-based composites for automotive applications”, Journal of Composite Materials. 2015. In Press. Q2 Journal, I.F = 1.257. 5. Faris M. AL- Oqla, S. M. Sapuan, M. R. Ishak, N. A. Aziz, "Decision making model for optimal reinforcement condition of natural fiber composites", Fibers and Polymers. Vol. 16 (1), 153-163, 2015. Q2 Journal, I.F = 1.113. 6. Faris M. AL- Oqla, S. M. Sapuan, M. R. Ishak, N. A. Aziz, "A model for evaluating and determining the most appropriate polymer matrix type for natural fiber composites", the International Journal of Polymer Analysis and Characterization (IJPAC). Vol. 20, 191–205, 2015. Q3 Journal, I.F = 1.487. 7. Faris M. AL- Oqla, S. M. Sapuan, M. R. Ishak, N. A. Aziz “Selecting natural fibers for bio-based materials with conflicting criteria” American Journal of Applied Sciences. Vol. 12 (1): 64-71, 2015. Scopus (Elsevier). 8. Faris M. AL- Oqla, S. M. Sapuan "Natural fiber reinforced polymer composites in industrial applications: feasibility of date palm fibers for sustainable automotive industry", Journal of Cleaner Production, Vol. 66, 347-354, 2014. Q1 Journal, I.F = 3.59. http://dx.doi.org/10.1016/j.jclepro.2013.10.050. 9. Faris M. AL- Oqla, S. M. Sapuan, M. R. Ishak, N. A. Aziz, "Combined Multi-criteria Evaluation Stage Technique as an Agro Waste Evaluation Indicator for Polymeric Composites: Date Palm Fibers as a Case Study". BioResources, Vol. 9(3), 4608-4621, 2014. Q1 Journal, I.F = 1.549. http://www.ncsu.edu/bioresources/BioRes_09/BioRes_09_3_4608_b_Al-Oqla_SIN_Combined_Multi_Criteria_Eval_Stages_Technique_5737.pdf 10. F. M. AL-Oqla, A. A. Omar "An expert-based model for selecting the most suitable substrate material type for antenna circuits". International Journal of Electronics, Vol.102 (2), 1-12, 2014. DOI: 10.1080/00207217.2014.961041. Q3 Journal, IF = 0.751. 11. M. I. Al-widyan, Faris M. AL-Oqla "Selecting the Most Appropriate Corrective Actions for Energy Saving in Existing Buildings A/C in Hot Arid Regions" Building Simulation. Vol. 7. No. 5, 2014. DOI: 10.1007/s12273-014-0170-y. Q3 Journal, IF = 0.631. 12. S.M. Sapuan, P.Fei-ling, Y. A. El-Shekeil, Faris M. AL-Oqla "Mechanical properties of soil buried kenaf fiber reinforced thermoplastic polyurethane composites". Materials & Design, Vol. 50, 467–470. 2013. Q1 Journal, I.F = 3.171 13. F. M. Al-Oqla, A. A. Omar "A Decision-Making Model for Selecting the GSM Mobile Phone Antenna in the Design Phase to Increase Overall Performance" Progress In Electromagnetics Research C, Vol. 25, 249-269, 2012. Q3 Journal, I.F = 1.23 14. Al-Widyan. M., Faris M. AL-Oqla "Utilization of Supplementary Energy Sources for Cooling In Hot Arid Regions via Decision-Making Model". International Journal of Engineering Research and Applications (IJERA), Vol. 1, Issue 4, pp. 1610-1622, 2011. 15. Doraid Dalalah, Faris AL-Oqla, Mohammed Hayajneh "Application of the Analytic Hierarchy Process (AHP) in Multi-Criteria Analysis of the Selection of Cranes", Jordan Journal of Mechanical and Industrial Engineering. JJMIE, Volume 4, Number 5, ISSN 1995-6665,Pages 567 – 578, November 2010. 16. Fikri Dweiri, Faris M. AL-Oqla, "Material Selection Using Analytical Hierarchy Process", International Journal of Computer Applications in Technology (IJCAT), Vol. 26, No. 4, pp. 182 -- 189. 2006. Scopus (Elsevier). Refereed Conference / Symposium 1. Faris M. AL- Oqla, S. M. Sapuan, M. R. Ishak, Nuraini A.A., “Selecting Natural Fibers for Industrial Applications”, Postgraduate Symposium on Biocomposite Technology 2015, March, 3, Serdang, Malaysia, 2015. ISBN: 978-983-2408-24-6. 2. Faris M. AL- Oqla, S. M. Sapuan, M. R. Ishak, Nuraini A.A., “Selecting Proper Alternatives of Natural Fiber Composites”, Postgraduate Symposium on Biocomposite Technology 2015, March, 3, Serdang, Malaysia, 2015. ISBN: 978-983-2408-24-6. 3. Faris M. AL- Oqla, S. M. Sapuan “Date Palm Fibers and Natural Composites” Postgraduate Symposium on Composites Science and Technology 2014 & 4th Postgraduate Seminar on Natural Fibre Composites 2014, Putrajaya, Selangor, Malaysia January,28, 2014. ISBN: 978-983-2408-15-4. 4. Faris M. AL- Oqla, S. M. Sapuan “Enhancement selecting proper natural fiber composites for industrial applications” Postgraduate Symposium on Composites Science and Technology 2014 & 4th Postgraduate Seminar on Natural Fibre Composites 2014, Putrajaya, Selangor, Malaysia January,28, 2014. ISBN: 978-983-2408-15-4. 5. Mohammed T. Hayajneh, Saleh. M. Radaideh, Faris M. AL-Oqla and Imad Nejdawi, “ Reductions of Pendulations of Overhead Cranes under the Effect of Air resistance by A Cable Manipulation Manner," Proceeding of the 5th International Symposium on Mechatronics and its Applications (ISMA08), Amman, Jordan, May 27-29, 2008. 6. Mohammed Hayajneh, Faris M. AL-Oqla, Doraid Dalalah, “Application of the Analytic Hierarchy Process in Multi-Criteria Analysis of the Selection of Cranes”17th International Conference For The International Association Of Management Of Technology, IAMOT2008, Dubai, UAE. April 6-10, 2008. 7. Faris M. AL- Oqla, Mohammed T. Hayajneh “A Design Decision- Making Support Model for Selecting Suitable Product Color to Increase Profitability” Design Challenge Conference Managing Creativity, Innovation, And Entrepreneurship, , Amman .Jordan, May 15 – 17, 2007. 8. Hayajneh, M. T., Saleh Radaideh, Faris .M. AL-Oqla, Faruq A. Al-Omari, "Reduction of Pendulations in Overhead Cranes Carrying Massive Loads on Long Cables Using A Cable Reeling Technique", International Journal of Engineering Simulation (IJES), Volume 6, No. 3, ISSN 1468-1137, Nov. 2005. 9. K. Asfar, Faris .M. AL-Oqla, “Controlling Pendulations of Tethered Satellites Using Tether Manipulation Technique”. The 54th International Astronautical Congress, Bremen – Germany, under supervision of International Astronautical Federation (I.A.F.), Sept.29-Oct.3, 2003. 10. K. Asfar, Faris .M. AL-Oqla, “A Cable Manipulation Technique for Cargo Pendulations Reduction” Ninth Nonlinear Vibrations, Stability, and Dynamics of Structures Conference, Virginia Tech, Blacksburg, Virginia - USA. July 28 – August 1, 2002.
MOMEN MOHAMMAD ABDALLA QASAIMEH	- Modeling the Effect of In Situ Nozzle-Integrated Compression Rolling on the Void Reduction and Filaments-Filament Adhesion in Fused Filament Fabrication (FFF). - Void reduction in fused filament fabrication (FFF) through in situ nozzle-integrated compression rolling of deposited filaments. - Improved print quality in fused filament fabrication through localized dispensing of hot air around the deposited filament.
MOHAMMAD AHMAD FALAH GHARAIBEH	* Books 1 - Gharaibeh, M., (2014) “Stress Concentration Factor of Countersunk Holes in Orthotropic Plates: A General Equation”, Scholars’ Press, ISBN: 978-3639667875. * Journals Articles 1. Su, Q., Gharaibeh, M., Pitarresi, J., Stewart, A., & Anslem, M. (2017) “Accelerated Vibration Reliability Testing of Electronic Assemblies Using Sine Dwell with Resonance Tracking”. ASME Journal of Electronic Packages (Under review). 2. Gharaibeh, M. & Obiedat, A., (2017) “Vibration Analysis of Rectangular Plates with Clamped Corners”, Journal of Engineering and Applied Sciences (Accepted). 3. Gharaibeh, M., Liu, D., & Pitarresi, J., (2016) “A Pair of Partially-Coupled Beams Subjected to Concentrated Force”. IEEE Transactions on Components, Packaging and Manufacturing Technology (In-Press). 4. Gharaibeh, M., (2016) “Finite Element Model Updating of Board-Level Electronic Packages by Factorial Analysis and Modal Measurements”. Microelectronics International (Accepted). 5. Obaidat, M., Meanazel, O., & Gharaibeh, M., (2016) “Pad Cratering: Reliability of Assembly Level and Joint Level”, Jordan Journal of Mechanical and Industrial Engineering (Accepted). 6. Gharaibeh, M., Su, Q., & Pitarresi, J., (2016) “Analytical Solution for Electronic Assemblies under Vibration”, ASME Journal of Electronic Packages, 138, 1. 7. Darwish, F., Tashtoush, G., & Gharaibeh, M. (2013). “Stress concentration analysis for countersunk rivet holes in orthotropic plates”. European Journal of Mechanics-A/Solids, 37, 69-78. 8. Darwish, F., Gharaibeh, M., & Tashtoush, G. (2012). “A modified equation for the stress concentration factor in countersunk holes”. European Journal of Mechanics-A/Solids, 36, 94-103. * Conference Proceedings 1. Su, Q., Pitarresi, J., Gharaibeh, M., Stewart, A., Joshi, G., & Anslem, M. (2014) “Accelerated Vibration Reliability Testing of Electronic Assemblies Using Sine Dwell with Resonance Tracking”. Proc. ECTC, 119-125. 2. Joshi, S., Arfaei, B., Singh, A., Gharaibeh, M., Obaidat, M., Alazzam, A., & Borgesen, P. (2012). “LGAs vs. BGAs–Lower Profile and Better Reliability”. Proc. SMTAI, 47-57. * Published Technical Reports 1 - Gharaibeh, M., Su, Q., Pitarresi, J., & Anselm, M. (2013) “Modeling and Characterization for Vibration”, Advanced Research in Electronics Assembly (AREA) Consortium, Universal Instruments Corporation. Binghamton, NY, USA. 2 - Gharaibeh, M., Pitarresi, J., & Anselm, M. (2013) “Strain Correlation: Finite Element Modeling and Experimental Data”, Advanced Research in Electronics Assembly (AREA) Consortium, Universal Instruments Corporation. Binghamton, NY, USA. 3 - Gharaibeh, M., Su, Q., Pitarresi, J., & Anselm, M. (2013) “Board-Level Drop Test: Comparison of Two ANSYS Modeling Approaches and Correlation with Testing”, Advanced Research in Electronics Assembly (AREA) Consortium, Universal Instruments Corporation. Binghamton, NY, USA. * Published Technical Presentations 1 - Huang, X., Su, Q., & Gharaibeh, M., “Elevated Temperatures Harmonic Vibrations”, Advanced Research in Electronics Assembly (AREA) Consortium, Universal Instruments Corporation, October, 2016. 2 - Su, Q., & Gharaibeh, M., “Mechanical Response of Solder Joints under Vibration Loading”, Advanced Research in Electronics Assembly (AREA) Consortium, Universal Instruments Corporation, February, 2015. 3 - Su, Q., Stewart, A., & Gharaibeh, M., “Finite Element Analysis and Experimental Characterization for Vibration Reliability of LGA vs. BGA Packages”, Advanced Research in Electronics Assembly (AREA) Consortium, Universal Instruments Corporation, September, 2014. 4 - Su, Q., Stewart, A., & Gharaibeh, M., “Combined Presentations: Vibration Reliability Plans”, Advanced Research in Electronics Assembly (AREA) Consortium, Universal Instruments Corporation, February, 2014. 5 - Pitarresi, J., & Gharaibeh, M., “Modeling and Characterization for Shock and Vibrations”, Advanced Research in Electronics Assembly (AREA) Consortium, Universal Instruments Corporation, September, 2013. 6 - Meilunas, M., & Gharaibeh, M., “Mechanical Testing Using 4pt Bend Test”, Advanced Research in Electronics Assembly (AREA) Consortium, Universal Instruments Corporation, June, 2012.
MAHMOUD MOHAMMAD AHMED RABABAH	Journal Articles Wasif, M., Rababah, M., Fatima, A., and Baig, S., “Prediction of Springback using the Machine Learning Technique in high-tensile strength sheet metal during the V-Bending Process”. Jordan Journal of Mechanical and Industrial Engineering, accepted on August, 2023. Al-Oqla, F., Rababah, M., Mutawe, S., and BaniHani, S., “Integrated TRIZ-CAD design approach for an ecofriendly solar driven vehicle for handicap transportation”. International Journal on Engineering Applications, accepted on August, 2023 Rababah, M., and Al-Oqla F., “Optimizing the mechanical performance of green composite materials using multi-integrated optimization solvers”. Pertanika Journal of Science and Technology, accepted on 7/July/2023. Rababah, M., Al-Oqla, F., and Wasif, M., “Application of analytical hierarchy process for the determination of green polymeric-based composite manufacturing process”. International Journal on Interactive Design and Manufacturing, Vol. 16 (2022), no.3, pp 943-954. Rababah, M., and Wasif, M., “Parametric relationship between hypoid gear teeth and accurate face-milling cutter‏”. Advances in Manufacturing, Vol. 8 (2020), no. 4, pp 537-555. Wasif, M., Iqbal, S.A., Ahmed, A., Tufail, M., and Rababah, M., “Optimization of simplified grinding wheel geometry for the accurate generation of end-mill cutters using the five-axis CNC grinding process”. The International Journal of Advanced Manufacturing Technology, Vol. 105 (2019), pp 4325-4344. Tlilan, H., Jawarneh, A., Ababneh, A., Tarawneh, M., Rababah, M., and Smadi, O., “Strain-concentration factor of internally pressurized thick-walled cylinders”. International Journal of Applied Mechanics and Engineering, Vol. 24 (2019), no. 1, pp 143 – 159. Rababah, M., Wasif, M., Omari, M., and Mutawe, S., “A Novel Approach to Profile-Milling for End-Mill Flutes in 4-Axis CNC Turn-Milling Machines, Part I: Mathematical Modeling”. International Review of Mechanical Engineering, Vol. 13 (2019), no. 2, pp 1-8. Rababah, M., Wasif, M., Omari, M., and Mutawe, S., “A Novel Approach to Profile-Milling for End-Mill Flutes in 4?Axis CNC Turn-Milling Machines, Part II: Simulation and Verification”. International Review of Mechanical Engineering, Vol. 13 (2019), no. 3, pp 203-211. Rababah, M., and Wasif, M., “Accurate machine-settings for the face-milling of hypoid gears‏”. International Review of Mechanical Engineering, Vol. 11 (2018), no. 12, pp 931-944. Rababah, M., Almagableh, A., and Aljarrah, M., “Five-axis rake face grinding of end-mills with circular-arc generators”. International Journal on interacting design and manufacturing, Vol. 11 (2017), pp. 93-101. Khairul, M., Sapuan, S., AL-Oqla, F., Zainudin, E., and Rababah, M., “Continum damage analysis, experimental and simulation for investigating the fatigue life performance of 316L steel at high temperatures”. International Journal of Materials and Structural Integrity, Vol. 11 (2017), pp 175-192. Aljarrah, M., Obeidat, S., Fouad, R., Rababah, M., Almagableh, A., and Itradat, A., “Thermodynamic calculations of the Mn–Sn, Mn–Sr and Mg–Mn–{Sn, Sr} systems”. IET Science, Measurement and Technology, Vol. 9 (2015), 681-692 Rababah, M., “Five-axis CNC grinding of end-mills with generic revolving profiles”. Jordan journal of mechanical and industrial engineering, Vol. 9 (2015), pp 159 – 165. Almagableh, A., Mantena, R., Alostaz, A., Rababah, M., Aljarrah, M., and Awad A., “Modeling the elastic modulus of exfoliated graphite platelets filled vinyl ester: analytical predictions with consideration of filler percolation”. Journal of Composite Materials, Vol. 49 (2015), 1285-1290 Almagableh A., Mantena, R., Awwad A., and Rababah, M., “Modeling of Creep Behavior for Graphene Filled Vinyl Ester Nano-Composites”, Jordan journal of mechanical and industrial engineering, Vol.8 (2014) pp 343 – 350. Aljarrah, M., Alkhazali, A., Obeidat, S., Almagableh, A., and Rababah, M., “On Phase Equilibria of Sn-Sr and Mn-Sn-Sr Systems”, Jordan journal of mechanical and industrial engineering, Vol. 8 (2014), pp 359 – 367. Aljarrah M., Essadiqi, E., Fouad, R., Rababah, M., and Almagableh, A., “The Effect of Annealing Conditions and Alloying Elements on the Microstructure Stability and Mechanical Properties of Mg-Zn-Cesheets”. Applied Mechanics and Materials, Vol. 472 (2014), 937-947. Rababah, M., and Chen, C., “An Automated and Accurate CNC Programming Approach to Five-Axis Flute Grinding of Cylindrical End-Mills using the Direct Method”. Journal of Manufacturing Science and Engineering, Transaction of ASME, Vol. 135 (2013), pp 011011 Rababah, M., Chen, C., and Wang, L., “A new approach to five-axis CNC flute grinding of solid end mills”. Materials Science Forum Vol. 723 (2013), pp 421-432. Conference Articles Rababah, M., and Chen, C., “Five axis CNC tool grinding, part I: rake face grinding”. ASME 2011 International Manufacturing Science and Engineering Conference, Corvallis, Oregon, USA, June 13-17, 2011. Book Chapters Rababah, M., and Al-Oqla, F., “Biopolymer composites and sustainability‏”, Advanced Processing, Properties, and Applications of Starch and Other Bio-Based Polymers, Elsevier, 1-10, 2020. AL-Oqla, F., and Rababah, M., “Challenges in design of nanocellulose and its composites for different applications”, Cellulose-Reinforced Nanofiber Composites, Woodhead publishing, 113-127, 2017.
MAHDI JAMIL AWAD AL-QURAN