Publications

List of Publications

Teacher	Title	Read More
MOHAMMAD SULEIMAN ODEH EL-MASHALEH	El-Mashaleh, M. (2007). “Benchmarking information technology utilization in the construction industry in Jordan.” Journal of Information Technology in Construction (ITCon). Special issue: construction information technology in emerging economies, 12, 279-291. El-Mashaleh, M., Minchin, R., and O’Brien, W. (2007). “Management of construction firm performance using benchmarking.” ASCE Journal of Management in Engineering, 23(1), 10-17. El-Mashaleh, M., O’Brien, W., and Kang, Y. (2006). “The impact of IT use at the firm level: an empirical study of contractor performance." Center for Construction Industry Studies (CCIS), Report No. 34, The University of Texas at Austin. El-Mashaleh, M., O’Brien, W., and Minchin, R. (2006). “Firm performance and information technology utilization in the construction industry.” ASCE Journal of Construction Engineering and Management, 132 (5), 499-507. El-Mashaleh, M., Al-Momani, A, Al-Sayyed, F., and Saleh, N. (2006). “A survey on IT usage in the construction, architecture and engineering, and consulting industry in Jordan.” Joint International Conference on Computing and Decision Making in Civil and Building Engineering, Montreal, Canada, 14-16 June, 11 pages. El-Mashaleh, M., Minchin, R., and O’Brien, W. (2005). “Benchmarking construction firm performance.” Proceedings of the 11th Joint CIB International Symposium, Helsinki, Finland, 13-16 June, 376-389. El-Mashaleh, M., O’Brien, W., and Minchin, R. (2005). “Construction firm performance and IT utilization.” Proceedings of the Construction Research Congress, SanDiego, CA, USA, 5-7 April, 642-646. El-Mashaleh, M. and O’Brien, W. (2004). “An Empirical study relating construction firm performance and IT utilization.” Proceedings of the 10th International Conference on Computing in Civil and Building Engineering, Bauhaus-Universit?t Weimar, Weimar, Germany, 2-4 June, 10 pages. El-Mashaleh, M., O’Brien, W., and London, K. (2001). “An envelopment methodology to measure and compare subcontractor productivity at the firm level.” Proceedings of the 9th Annual Conference of the International Group for Lean Construction, National University of Singapore, Singapore, 6-8 August, 17 pages. EL-Mashaleh, M. and Chasey, A. (1999). “Improving the cost and schedule control system.” Cost Engineering, American Association of Cost Engineers, July, 39-41. EL-Mashaleh, M. and Chasey, A. (1998). “Effective construction cost and schedule control.” Semiconductor Fabtech, 9th Edition, IGC Publishing Ltd, London, Winter, 1998/99, 129-131.
AHMED NAEIF ALI BDOUR	1. Bdour, A.; Hejab, A.; Almakhadmah, L.; Hawwa, M. (2023). Management strategies for the efficient energy production of brackish water desalination to ensure reliability, cost reduction, and sustainability. Global J. Environ. Sci. Manage., 9(SI): 1-20. DOI: 10.22034/GJESM.2023.09.SI.11 2. Al-Obaidi, M. A., Alsarayreh, A. A., Bdour, A., Jassam, S. H., Rashid, F. L., & Mujtaba, I. M. (2023). Simulation and optimisation of a medium scale reverse osmosis brackish water desalination system under variable feed quality: Energy saving and maintenance opportunity. Desalination, 116831. 3. Bdour, A. N., Al-Sadeq, N., Gharaibeh, M., Mendoza-Sammet, A., Kennedy, M. D., & Salinas-Rodriguez, S. G. (2022). Techno-Economic Analysis of Selected PV-BWRO Desalination Plants in the Context of the Water–Energy Nexus for Low–Medium-Income Countries. Energies, 15(22), 8657. 4. Ahmed N. Bdour, (2022). Arid Lands Flood Evaluation and Mitigation Measures Using HEC-HMS Model and Best Management Practices (BMPs). Global NEST Journal. Vol. 24, Issue 4, PP. 621-628 https://doi.org/10.30955/gnj.004221 5. Ahmed Bdour and Zeyad S. Tarawneh (2020). The influence of stream corridor parameters on fish species richness in the Clearwater River (Idaho, USA) EQA - International Journal of Environmental Quality, ISSN 2281-4485 - Vol. 36: 15-22. DOI: 10.6092/issn.2281-4485/9147 6. Thakir Almomani, Suleiman BaniHani, Ahmad Bdour, Othman Smadi, Amer Alsaraira, Ahmad Al-Jarrah, Rula Abdallat, and Samer Awad (2016). Influence of erythrocyte shape on platelet scattering toward vessel wall. International Journal of Biomedical Engineering and Technology, 2016 Vol. 21 No. 3, pp. 264-278. ISSN: 1752-6418, DOI: 10.1504/IJBET.2016.078289 7. Zeyad Tarawneh, Ahmed Bdour (2015). Bias in Return Period of Droughts Estimated from Tree-ring Reconstructions. Water Resources (springer), Water Resources 43(3):565-570 · May 2016, ISSN: 0097-8078, DOI: 10.1134/S0097807816030179 8. Ahmed Bdour, Zeyad Tarawneh, Thakir Almomani, Mohammed ElMashaleh (2015). Analysis of Hospital Staff Exposure Risks and Awareness about Poor Medical Waste 9. Management - A Case study of the Tabuk Regional Healthcare System - Saudi Arabia (2015). Journal of Communicable Diseases. Volume 47(2), pp. 1-13. ISSN: 0019-5138 10. Ahmed N. Bdour, Yahia Khalayleh, Aslam A. Al-Omari (2015). Assessing Mechanical Properties of Hot Mix Asphalt with Wire Wool Fibers. Advances in Civil Engineering, Volume 2015, Article ID 795903, 6 pages. DOI: 10.1155/2015/795903 11. Mohammad S. El-Mashaleh, Khaled H. Hyari, Ahmad N. Bdour, Shaher M. Rababeh (2015). A Multi-Attribute Decision-Making Model for Construction Enterprise Resource Planning System Selection. International Journal of Construction Education and Research, DOI:10.1080/15578771.2015.1015755 12. Ahmed N Bdour, Aljuhani M. (2013). Utilization of Waste Marble Powder In Cement Industry, Int. J. of Environment and Waste Management, 2013 Vol.11, No.4, pp.399 – 409, DOI: 10.1504/IJEWM.2013.054265 13. Ahmed N. Bdour, 2013. Influence of Stream Corridor Parameters on Fish Populations in the Clearwater River, ID, USA. Journal of Fisheries and Aquatic Science, 8: 506-515. DOI: 10.3923/jfas.2013.506.515 14. Ahmed Bdour (2012). Perspectives on a Strategic Jordanian Water Project: The Red Sea to Dead Sea Water Conveyance Construction. Trends in Applied Sciences Research 3(1):121-126. (ISSN: 2141-7016) 15. Ahmed N. Bdour (2011). Perspectives on a Strategic Jordanian water project: The Red Sea to Dead Sea Water Conveyance Construction, Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS) 3 (1): 121-126 ISSN:2141-7016 16. Ahmed N Bdour and Yahia A. Al-Khalayleh (2010). Innovative Application of Scrap- Tire Steel Cords In Concrete Mixes. Jordan Journal of Civil Engineering, Volume 4, No. 1, ISSN:1993-0461 17. Nidal Hadadin, Maher Qaqish, Emad Akawwi and Ahmed Bdour (2010). Water shortage in Jordan: Sustainable solutions. Desalination Journal, Vol. (250), pp. 197-202. Doi:10.1016/j.desal.2009.0.1.26 18. Ahmed N Bdour (2010). Development of Specifications for Urban Wastewater Utilization in Jordan. Journal of Environmental Protection, Vol. (4), pp. 114-125 doi:10.4016/jep.2010.50128 19. Ahmed Bdour, Moshrik Hamdi, and Zeyad Tarawneh (2009). Perspectives on Sustainable Wastewater Treatment Technologies and Reuse Options in the Urban Areas of the Mediterranean Region. Desalination Journal, Vol. (237), pp. 162-174. doi:10.1016/j.desal.2007.12.030 20. Hamdi, M. Bdour A., and Zeyad Tarawneh (2008). Diesel Quality in Jordan: Impacts of Vehicular and Industrial Emissions on Urban Air Quality. Journal of Environmental Engineering Science, 25(9): 1333-1344. DOI: 10.1089/ees.2007.0234 21. Ahmed Bdour, Moshrik Hamdi, and Moa'yyad Shawaqfeh (2008). Enhancing Public Participation in Local Air Pollution Assessment: A Citizen Participation Prototype from Zarqa Governorate, Jordan. Journal of Environmental Engineering Science. Vol. 25(4), pp. 451-459. DOI: 10.1089/ees.2007.0066 22. Hamdi, M., Bdour A., and Zeyad S. Tarawneh (2008). Developing Reference Crop Evapotranspiration Time Series Simulation Model Using Class A Pan: A Case Study for the Jordan Valley /Jordan. Jordan Journal of Earth and Environmental Sciences (JJEES), Vol. 1(1), pp. 33-44. 23. Zeyad S. Tarawneh, Nidal A. Hadadin and Ahmad N. Bdour, (2008). Policies to Enhance Water Sector in Jordan. American Journal of Applied Sciences, Vol. 5 (6), pp. 698-704. ISSN 1546-9239 24. Bdour A. Altrabsheh B., Hadadin N., and Al-Shareif M. (2007). Assessment of Medical Wastes Management Practice: A Case Study of the Northern Part of Jordan. Journal of Waste Management. Vol. 27, pp. 746-759. doi:10.1016/j.wasman.2006.03.004 25. Nidal Hadadin and Ahmed Bdour (2006). Investigation of the Brownlie (1981) Sediment Transport Equation in Open Channels. European Journal of Scientific Research, Vol. 13(2), pp. 258-266 26. Bdour A., and N. Hadadin, (2005). Potentials and Limitations of Wastewater Reuse in Jordan: The Reuse options in the Jordan Valley. Journal of Agronomy, 4(4), pp. 315-322. 27. Hadadin, N., and A. Bdour, (2005). At–station Hydraulic Geometry for Incised Channels. Journal of Applied Sciences, 5(9), pp. 1606-1612. 28. Papanicolaou, A.N., Bdour, A., and Weickin, E. (2004). One dimensional hydrodynamic/sediment transport model applicable to steep mountain streams. Journal of International Association of Hydraulic Research, 42 (4), pp. 357-375. 29. Papanicolaou, A.N., and Bdour, A., (2004). A Theoretical Travel Time Based on Watershed Hypsometry. Journal of the American Water Resources Association (JAWRA), 40(5), pp. 1385-1387. 30. Papanicolaou, A., Bdour, A., Evangelopoulos, N., and Talebbeydokhti, N., (2003). Watershed and Instream Impacts on the Fish Population in the South Fork of the Clearwater River, Idaho. Journal of the American Water Resources Association (JAWRA), 39 (1), pp. 191-203.
HISHAM YOUSEF AHMAD QASRAWI	Refereed Journals 1. Hisham Qasrawi, “Hardened Properties of Green Self-Consolidating Concrete Made with Steel Slag Coarse Aggregates under Hot Conditions”, Volume 117, No. 1, pp 107-118, 2020. 2. Reshma Rughooputh, Rahul Beeharry and Hisham Qasrawi, “Warm mix asphalt for better sustainability under tropical climate”, International Journal of Pavement Engineering, Volume 21, No. 1, pp 1-8, 2020. 3. Hisham Qasrawi, “Effect of The Position of Core on the Strength of Concrete of Columns in Existing Structures”, Journal of Building Engineering, Volume 25, 100812, September 2019. 4. Denys Breysse, Jean-Paul Balayssac, Samuele Biondi et al; Hisham Qasrawi et al , “Recommendation of RILEM TC249-ISC on Non Destructive In-situ Strength Assessment of Concrete”, Materials and Structures, Volume 52, No. 71, August 2019. 5. Hisham Qasrawi, “Fresh Properties of Green SCC Made with Recycled Steel Slag Coarse Aggregate under Normal and Hot Weather”, Journal of Cleaner Production, Vol. 204, 2018. , pp 980-991. 6. Hisham Qasrawi, “Optimal Method for Teaching Concrete Technology for Civil Engineering Students”, MOJ Civil Engineering, Volume 4, Issue 4, 2018, pp 225-235. 7. Hisham Qasrawi, “Towards Sustainable Self Compacting Concrete: Effect of Recycled Slag Coarse Aggregate on the Fresh Properties of SCC”, Advances in Civil Engineering, Volume 2018, Article ID 7450943, 9pp, 2018. 8. Faisal Shalabi, Ibrahim Asi, Hisham Qasrawi, “Effect of by-product Steel Slag on the Engineering Properties of Clay Soils”, Journal of King Saud University, Engineering Sciences, 29, 2017, pp 394-399. 9. Hisham Qasrawi, “Design of Normal Concrete Mixtures Using Workability-Dispersion-Cohesion Method”, Advances in Civil Engineering Vol. 2016, pp11, 2016. 10. Hisham Qasrawi and Ibrahim Asi, “Effect of bitumen grade on hot asphalt mixes properties prepared using recycled coarse concrete aggregate”, Construction and Building Materials, Vol 121, pp 18-24, 2016. 11. Hisham Qasrawi, “The Use of Steel Slag to Enhance the Mechanical Properties of Recycled Aggregate Concrete and Retain the Environment” Construction and Building Materials , 54, 2014, pp 298-304. 12. Hisham Qasrawi and Iqbal Marie, “Towards Better Understanding of Concrete Containing Recycled Concrete Aggregate”, Advances in Materials Science and Engineering, Volume 2013, Article ID 636034, October, 8pp, 2013 13. Iqbal Marie and Hisham Qasrawi, “Closed-loop recycling of recycled concrete aggregates”, Journal od Cleaner Production, Elsevier, Vol 37 , pp 243-248, 2012., 14. Hisham Qasrawi, “Use of Relatively high Fe2O3 Slag in Concrete as Coarse Aggregate”, ACI Materials Journal, ACI, USA, Vol 109, July/August 2012, pp 471-478. 15. Hisham Qasrawi, Faisal Shalabi and Ibrahim Asi, "Use of Low CaO Unprocessed Steel Slag in concrete as Fine Aggregate", Journal of Construction and Building Materials, Volume 23, Issue 2, February 2009, pp 1118–1125. 16. Ibrahim Asi, Hisham Qasrawi, Faisal Shalabi, "Use of Steel Slag Aggregate in Asphalt Concrete", Canadian Journal of Civil Engineering, 34, 2007, pp 902-911. 17. Iqbal Marie and Hisham Qasrawi “Virtual Assembly of Pottery Fragments Using Moire Surface Profile Measurements”, Journal of Archaeological Science, 32, 2005, pp 1527 – 1533 18. Hisham Y. Qasrawi, Ibrahim M. Asi and H. I. Al-Abdul Wahhab, “RCCP Mix Proportioning in Hot Weather for a Specified Tensile Strength”, Cement and Concrete Research Vol 35, No. 2, 2005, pp 267 – 276. 19. Samir Al-Sadder and Hisham Y. Qasrawi, “Exact Stiffness Matrix for Nonprismatic Beam-Columns with Elastic Semirigid Joint Connections”, Emirates Journal for Engineering Research, 9, (2), 2004, 127-135. 20. Hisham Qasrawi, “Design of Concrete Mixes in Hot Weather for Minimum Cost”, Building Technology, Vo1., No. 2,2003, pp 73 – 79.? 21. Hisham Qasrawi and Iqbal Marie, “The Use of USPV to Anticipate Failure in Concrete under Compression”, Cement and Concrete Research, 33, 12, December 2003, pp 2017-2021. 22. Hisham Qasrawi, “Reply to the discussion by E. Arioglu, E. Arioglu and C. Girgin of the paper – Concrete strength by combined nondestructive methods: simply and reliably predicted”, Cement and Concrete Research, 31, 2001, pp 1239-1241. 23. Hisham Qasrawi, “Concrete Strength by Combined Nondestructive Methods: Simply and Reliably Predicted”, Cement and Concrete Research, Vol. 30, 2000, pp 739-746. 24. Hisham Qasrawi, “Concrete Compaction in Jordan: Problems and Solutions”, J. J. of Applied Science, Vol. 2 (4), 2000, pp 1-21. 25. Hisham Qasrawi and P. Kattan, “Minimum Reinforcement Ratio in the Jordanian Code: Applicability and Comparisons”, J. J. of Applied Science, Vol. 1 (2), 1999, pp 33-45. 26. P. Kattan and H. Qasrawi, “Developments in the 1995 ACI relating to Bond Strength And Comparison with Other Codes”, J. J. of Applied Science,Vol. 1, No. 1, 1999, PP 33 – 45. 27. J. Sawan and H. Qasrawi "Early Age Properties of Pozzolanic Mortars under Hot Weather". Journal of Materials in Civil Engineering, ASCE, Vol. 3, No. 3, August 1991, pp 165-178. Conferences 1. Hisham Qasrawi, “The Use of Recycled Building Rubble in the Reconstruction of Demolished Buildings”, JICEC 2017: The Seventh International Jordanian Civil Engineering Conference Reconstruction of Damaged Zones, The Role of Civil Engineering. Amman, Jordan 2017. 2. Hisham Qasrawi, Jamal Qtaishat and Imad Abed-Al-Rahim , “Quality Control of Concrete in Less Technechally Developed Sites: Case Study,”, The 6th International Jordanian International Civil Engineering Conference”, Amman, Jordan 2015. 3. Hisham Qasrawi and Ibrahim Asi, “Use of Recycled Concrete Aggregate in Hot Asphalt Mixes” The Fourth Jordan International Conference and Exhibition for Roads and Transport “High Priority Issues in the Future Transport Sector” Amman, Jordan 2014. 4. Hisham Qasrawi, Iqbal Marie & Hasan Tantawi, “Use of Recycled Concrete Rubbles as Coarse Aggregate in Concrete”, Proceedings of the 5th Jordanian International Civil Engineering Conference, Amman, Jordan, pp 281-287, 2012 5. Faisal Shalabi, Ibrahim Asi and Hisham Qasrawi, “Use of Steel Slag to Improve the Engineering Properties of Base-Course Materials”, International Engineering Conference on Hot Arid Regions”, Al-Ahsa, KSA, March 2010. 6. Hisham Qasrawi, "Optimum Plastic Design of Steel Portal Frames", Third International Conference On Modeling, Simulation, And Applied Optimization, Sharja, January, 2009. 7. Hisham Qasrawi, Faisal Shalabi and Ibrahim Asi, "Effect of Unprocessed Steel Slag on the Strength of Concrete when Used as Fine Aggregate", Proceedings of the 2nd ACI-KC conference on the Design and Sustainability of Structural Concrete in the Middle East with Emphasis on High Rise Buildings, Kuwait, 2007, pp 227-237. 8. Hisham Qasrawi “Deterioration of Concrete Sewers by Bacteria: A Combined Approach”, Presented at the 4th Jordanian Civil Engineering Conference, Jordan, April 2006. 9. Hisham Y. Qasrawi, “Corrosion of Steel Reinforcement in by Bacteria”, Proceedings of 12th Conference for Building & Construction, Cairo, 2005, pp 190 – 124. 10. Hisham Y. Qasrawi, “Study of Structures Collapsed due to the Snow of 2003”, First Middle East Conference on Advances in Civil, Mechanical and Material Engineering, Amman, Jordan, May 2005. 11. Qasrawi, H., Asi, I.M., Elayan, F., and Hakooz, D., “Analytical Study of Vehicles Speed on Rural Highways”, A paper presented in the Fourth Jordanian Conference for Traffic Safety, Amman, Jordan, May, 2005. 12. Iqbal Marie and Hisham Qasrawi “Virtual Assembly of Historical Pottery Fragments Using Moire’ Profile Measurements, Presented at the Third International Conference: Science & Technology in Archaeology & Conservation, Jordan, December 2004. 13. Hisham Qasrawi and Yahya Abdel-jawad, “Introducing Self-Compacting Concrete for Developing Countries”, 7th ICCT –I – (9), October,2004, pp 101 – 114. 14. Hisham Qasrawi and Yahia Abdel-Jawad “Solving Concrete Compaction Problems in the Middle East”, 6th International Congress on Advances in Civil Engineering (ACE 2004), Istanbul, Turkey, October, 6-8, 2004, pp 1025-1035. 15. Hisham Qasrawi and Yahia Abdel-Jawad “Use of Self-Compacting Concrete to Overcome Compaction Problems in the Arab World”, Proceedings InterBuild 11, Egypt, 2004, pp 503-513. 16. Imad Abed Al-Rahim and Hisham Qasrawi “Quality Control Of Concrete Building Construction By The "Dozen-M" Philosophy”, Proceedings InterBuild 11, Egypt, 2004, pp 515-521. 17. Hisham Qasrawi and Imad Abed Al-Rahim, “Quality Control of Road Construction by the Dozen M-Phylosophy”, Proceedings of Jordan International Conference on Sustainable Development of Transportation, Jordan, 2004. 18. Hisham Qasrawi and Iqbal Marie, “Investigation of cracks in Concrete Pavements by Non-destructive Techniques”, Proceedings of Jordan International Conference on Sustainable Development of Transportation, Jordan, 2004. 19. Hisham Y. Qasrawi, Ibrahim M. Asi and Iqbal Marie, “Steel Slag Aggregate for Road Construction: An Overview”, A paper presented at Industrial and Structural Wastes workshop, Amman, Jordan, December 2003. 20. Hisham Y. Qasrawi and Samir Al-Sadder, “The Role of Specifications in the Quality Control of Concrete in the Arab World”, Proceedings of the Seventh Gulf Forum, Kuwait, September 2003. 21. Hisham Qasrawi and Peter Kattan, “Minimum Reinforcement Ratio in JBC 5/93: Is It Safe?” Presented at the Scientific Days for Civil Engineering, Amman, April, 2003. 22. Hisham Qasrawi, “Design of Concrete Mixes in Hot Weather for Minimum Cost”, Proceedings of “Urban Development and Building Problems in Desert Reigns ”, Vol. 3, Saudi Arabia, November 2002, pp 581 – 592. Also published in building Technology, Vo1., No. 2,2003, pp 73 – 79.? 23. I. M. Asi, H. Y. Qasrawi, H. I. Al-Abdul Wahhab and A. K. Azad, “Cracking of Ground Beams in a Commercial Building: Case Study”, Proceedings of the Sixth International Conference for Concrete Technology in Developing Countries, Jordan, October 2002, pp 809 – 818. 24. Hisham Qasrawi and Samir Al-Sadder, “Corrosion of Steel by Bacteria: A New Perspective”, Proceedings of the 4th. Jordanian International Chemical Engineering Conference, Jordan, September 2002,pp 575-589. 25. Hisham Qasrawi, “Corner Reinforcement in Reinforced Concrete Slabs: Mechanics, Importance and Use”, Proceedings of the 3rd International Jordanian Civil Engineering Conference, Jordan, October, 2001,pp 95-111. 26. Hisham Qasrawi and I. Marie, “Monitoring Concrete Failure by USPV Detector”, Proceedings of the first Middle East Nondestructive Testing Conference, Bahrain, September 2001, pp 573-584. 27. Hisham Qasrawi, “Lessons from Izmit Earthquake”, Proceedings of the Second National Symposium on Earthquake Engineering, Algeria, October 2000. Also, published in the proceedings of the Scientific Days for Civil Engineering Research, November 2000, pp 3-19. 28. Hisham Qasrawi, “Design of Concrete Mixes for the Minimum Cost”, Proceedings of the “Arabic Building Materials and Economic Challenges” Conference, Cairo, 2000, pp 723 – 737. 29. Hisham Qasrawi, and M. Abu-Afeefeh, “Quality Control of Concrete in Developing Countries”, Proceedings of the “Arabic Building Materials and Economic Challenges” Conference, Cairo, 2000, pp 607 – 626. 30. Hisham Qasrawi, “Safety Provisions in the Jordanian Codes: Applicability and Reliability”, Proceedings of Jordan Second Civil Engineering Conference, October 1999, PP 579 – 606. 31. Hisham Qasrawi and M. Shaqra, “ Efficient Professional Design of Reinforced Concrete Columns Using JBC 5/93 Recommendations”, Proceedings of Jordan Second Civil Engineering Conference, October 1999, PP 1 – 21. 32. Hisham Qasrawi, “A Simple Method for the Determination of Concrete Strength in Existing Structures By Nondestructive Methods”, Published in the Arab Conference for Maintenance and Rehabilitation of Structures”, Cairo, 1998, PP 39 – 57. 33. Hisham Qasrawi, “The Role of Bacteria in the Deterioration of Building Materials and Structures”, Civil Engineering Journal, October 1995. 34. Hisham Qasrawi "Quality Control of Concrete at Site", Civil Engineering Journal, December 1994, pp 1-4.
IQBAL ABDUL KARIM MAHMOUD MARIE	1 Marie I. "Zones of weakness of rubberized concrete behavior using the UPV". Journal of Cleaner Production. 116 (2016) 217-222. 2.I. Marie, “Perception of Darkening of Stone Façades and the Need for Cleaning”, International Journal of Sustainable Built Environment 2 (2013), pp. 65-72 DOI information: http://dx.doi.org/10.1016/j.ijsbe.2013.09.001 3. Hisham Qasrawi and Iqbal Marie, “Towards Better Understanding of Concrete Containing Recycled Concrete Aggregate”, Advances in Materials Science and Engineering,Volume 2013 (2013), Article ID 636034, 8 pages doi: http://dx.doi.org/10.1155/2013/636034 4. Marie, I., Quiasrawi, H., “Closed-loop recycling of recycled concrete aggregates”, Journal of Cleaner Production, 37 (2012) 243-248 5. H. Qasrawi, I Marie and Hassan Tantawi, “ Use of recycled Concrete Rubble as Coarse Aggregates in Concrete”, 5th jordanian international civil engineering conference 17th -19th January 2012 , Land mark hotel, Amman . P 281-287 6.Iqbal Marie, “Stress Diagrams as a Structural Documentation of an Architectural Heritage” as achapter from the Archeology Research Trends book, Editors: Alex R. Su?rez and Marc N. V?squez, ISBN: 978-1-60456-678-9. Pub. Date: 2009, NOVA publishers 7. Batayneh, M., Marie, I., and Asi, I.M , " Promoting the use of crumb rubber concrete in developing countries", Waste Management, 28(2008), 2171 – 2176. 8. I Marie and S S Issa , “Prediction of the Transition Rise of a Circular Plate.”, Proceedings of the 3rd International Conference on: Application of Traditional and High Performance Materials in Harsh Environment", Jan. 23-24 (2008) , 247-250, American University of Sharja, UAE. 9. ثقافة العيب و العمالة في قطاع الإنشاءات، ورشة عمل عن مواجهة تحديات ثقافة العيب ، فندق القدس الدولي- عمات/ الأردن ، الأحد 26/8/2007 10. المساهمة في الحفاظ على البيئة عن طريق فرز النفايات الصلبة، ورشة العمل التعريفية بمشروع فرز النفايات الصلبة في منطقة الهاشمية، الثلاثاء 3/7/2007 – القرية الحضرية- لواء الهاشمية 11. M. Mahdi, and I. Marie, "A Numerical Prediction of the Influence of Concrete Mix Structure on its Elastic Stiffness: Part I" , ICCE-15 (The Fifteenth International Conference on Composites/ Nano Emgineering), Haikou, Hainan Island, China, July 15-21, 2007. 12. I. Marie, " Structural Documentation of an Architectural Heritage" fifth International Conference on Science ands Technology in Archaeology and Conservation, July 6-7-2007 in Baeza Spain, 13. Batayneh, M., Marie, I., and Asi, I.M., “Use of Selected Waste Materials in Concrete Mixes”, Journal of Waste Management, Elsvier, 27(2007) 1870-1876 14. I. Marie and H. Qasrawi, “ Investigation of Depth and Inclination of Surface Cracks in Concrete Slabs using Ultrasonic Technique” .”, 2nd International conference on Applications of Traditional and High Performance Materials in Harsh Environments, March 20-22 , 2006, American University of Sharja, UAE. 15. إقبال مرعي "المحادثة الإلكترونية و أثرها على المجتمع" مجلة روز , العدد الأول , تشرين أول 2005, ص .34 16. I. Marie, “ Visual Effect of Contaminated Stone Facades in Amman”, 4th international Conference on Science and Technology in Archaeology and Conservation, 7th to 11th December, 2005. 17. I.Marie and H. Qasrawi “Virtual Assembly of Pottery Fragments Using Moiré Surface Profile Measurements “ Journal of Archaeological Science, Elsvier. 32 (2005) 1527-1533. 18. I Marie and S S Issa , “Resedual Stress Distribution Produced by Inconvenient Storage Conditions.”, Proceedings of the Fifth International Conference on: Composite Science and Technology, Feb. 1-3 , 2005, American University of Sharja, UAE. 19. I. Marie and H. Qasrawi, “ Virtual Assembly of Historical Pottery Fragments Using Moir’ Surface Profile Measurements” Third international Conference on Science and Technology in Archaeology and Conservation, 7th to 11th December, 2004, Zrqa- Dead Sea 20. Marie I. “Virtual Modeling in Manufacturing” Vocational Training, Vocational Training Corporation, 16, 2004, pp 12-14 21. I. Marie, M.. Batayneh, and I. Asi, “ Construction Wastes Management and Materials Recycling”, Presented in Environment and saafety in construction projects Workshop, 12-10-2004, Amman, Jordan 22. I. Marie, M.Batayneh, and I. Asi,” Utilization of recycled scrap tires and glass in concrete mixes” presented in the physics of buildings and environment protection syrian, egyptian and deutch workshop, 28-30 /9/2004 Albaath University, Syria 23. H.A.Hadid, S., Al-Sadder, I.A.Marie and M Bakir,” The Role of Interface Element for Strip Plate on Elastic Media” presented in the International Conference on Geotechnical Engineeridng, October 3-6, 2004, University of Sharijah, UAE 24. H. Qasrawi and I Marie, “ Investigation of Cracks in Concrete Pavements by Nondestructive Techniques” presented in the Jordan International Conference on Sustainable Development of Transportation Systems, April 13-15, 2004. 25. I. Marie and S.S.Issa,” Development of Computer Aided Shadow Moire’ Technique for Surface Topography Inspection Using 3D-Max.”, presented in First International conference on: Applications of Traditional and High Performance Materials in Harsh Environments, January 20-22 , 2004, UAE. 26. I. Marie, M.Batayneh, and I. Asi, “ Recycling Scrap Tires as a Substitute Material in Concrete Mixes”. presented in First International conference on: Applications of Traditional and High Performance Materials in Harsh Environments, January 20-22 , 2004, UAE. 27. Hisham Qasrawi and Iqbal Marie, “The Use of USPV to Anticipate Failure in Concrete under Compression”, Cement and Concrete Research, 33, 12, 2003, pp 2017-2021. 28. I. Marie, M.. Batayneh, and I. Asi, “ Scrap tires recycling in Concrete Mixes”, Presented in Industrial and Constructional Wastes Workshop, 16-12-2003, Amman, Jordan 29. H.A.Hadid and I.A.Marie, “ Appraisal and Treatment of Damaged Buildings as Result of Explosionsand Air Raid Attackes”, Preceedings of the civil engineering scientific day, Al Balkaa University, Jordan, 26/5/2003. 30. H. Qasrawi and I Marie “ Monotering Concrete Failure by USPV Tester”. Preceedings of 1st Middle East Nondestructive testing Conference and exhibition, Bahrain, September 24-26, 2001. 31. S.S. Issa and I.A. Marie, "Some material and light source parameters in inverse integrated photoelasticity", Proceed¬ing of the 9th International Conference on Experimen¬tal Mechanics, Lyngby, Copen¬hagen, Denmark, August 20-24, 1990. 32. S.S. Issa and I.A. Marie, "Applicability of some cited methods in integrated photoelasticity", Proceedings of the 1990 SEM Spring Conference on Experimental Mechan¬ics, Albuquerque, New Mexico, U.S.A., June 3-6, 1990. 33.S.S. Issa and I.A. Marie, "Material noise in integrated photoelasticity", Proceedings of the 1990 SEM Spring Conference on Experimental Mechanics, Albuquerque, New Mexico, U.S.A., June 3-6, 1990 34. S.S. Issa and I.A. Marie, "Parameters affecting quantitative inverse of integrated photoelasticity", EUROMECH 256, Tallin, Estonia (USSR), September 25-28, 1989. 35.S.S. Issa and I.A. Marie, "Role of stress components on reverse integrated photoelasticity", Proceedings of the 12th GESA-Symposium - Experimental Mechanics in Research and Practice, Veitshoechheim, Germany, May 11-12, 1989. 36. S.S. Issa and I.A. Marie, "Characteristic angle, light intensity and their correlation to wavelength in three-dimensional photoelastic media", STRAIN, Journal of the British Society for Strain Measurement, 22(2), 1986, pp. 63-68. 37.S.S Issa and I.A. Marie,"Characteristic angle, light inten¬sity and their correlation to the wavelength in three-dimensional photoelastic medium", presented at the 5th Donau-Adria Symposium, Zagreb, Yugoslavia, June 15-17, 1984.
ZEYAD SALEM D'YAB TARAWNEH	Zeyad Tarawneh (2022). The Characteristics of the Wala Dam Monthly Inflow and the Relationship between Inflow and Outflow. Jordan Journal of Civil Engineering, Vol. 16, No. 3, pp: 497 – 506. Zeyad Tarawneh, Nidal Hadadin and Esraa Tarawneh (2020). Extreme Floods in Central Jordan: Frequency Analysis. Italian Journal of Engineering Geology and Environment, Vol. 2020-1, pp: 17 – 23. Elgaali Elgaali, Zeyad Tarawneh (2019). Effects of Climate Change on River flow Stochastic Approach. Proceedings of Advances in Science and Engineering Technology International Conferences (ASET), 26 March - 10 April 2019, UAE. DOI:10.1109/ICASET.2019.8714549. Publisher:IEEE. Zeyad Tarawneh, Khaled Hyari, Hassan Katekhuda (2017). Evaluating the characteristics of multiyear extreme droughts in semi-arid regions. Accepted for publication in Environmental Processes. Zeyad Tarawneh (2017). Estimation of consistent wet period characteristics for further improvement of water resources studies. Water and Environment Journal, Vol. 31 , No. 2, pp: 245 - 251. Zeyad Tarawneh, Yahia Khalayleh (2016). Improved estimate of multiyear drought for water resources management studies. Water and Climate Change, Vol. 7, No.4, pp: 721 - 730. Zeyad Tarawneh and Ahmed Bdour (2016). Bias in return period of droughts estimated from tree-ring reconstructions. Water Resources, Vol. 43, No. 3, pp: 565 - 570. Khaled Hyari, Zeyad Tarawneh, Hasan Katkhuda (2016). Detection model for unbalanced pricing in construction projects: a risk-based approach. Journal of Construction Engineering and Management, Vol. 142, No. 12, pp: 1 - 10. Ahmed Bdour, Zeyad Tarawneh, Thakir Al-Momani, Mohammed El-Mashaleh (2015). Analysis of hospital staff exposure risks and awareness about poor medical waste management - a case study of the Tabuk regional healthcare system - Saudi Arabia. Journal of Communicable Diseases, Vol 47, No. 2, pp: 1 - 13. Hadadin N., Tarawneh Z., Shatanawi K. Banihani Q and Hamdi.M. (2013). Hydrological Analysis for Floodplain Hazard of Jeddah’s Drainage Basin, Saudi Arabia. Arabian Journal for Science and Engineering, Vol. 38, pp: 3275-3287. Hadadin N., Shawash S., Tarawneh Z., Banihani Q. and Hamdi R. (2012). Spatial hydrological analysis for water harvesting potential using ArcGIS model: the case of the north-eastern desert, Jordan. Journal of Water Policy, Vol. 14, pp: 524-538. Tarawneh Z. The Water Supply in Jordan During Drought Conditions. Journal of Water Policy, Vol. 13, No.6, pp: 863-876. Tarawneh Z. Augmenting short hydrological records to improve water resources studies. Proceedings of the 15th International Water Technology Conference, Egypt, March 31 – April 2, 2011. Tarawneh Z. and Hadadin N. (2009). Reconstruction of the rainy season precipitation in central Jordan. Hydrologic Sciences Journal, Vol 54, No.1, pp:189-198. Bdour A., Hamdi M. and Tarawneh Z. (2009). Perspectives on sustainable wastewater treatment technologies and reuse options in the urban areas of the Mediterranean region. Desalination Vol. 237, pp: 162-174. Tarawneh Z., Hamdi M. and Elgaali E. (2009). Bi-site analysis of meteorological drought duration: theoretical modeling and application. Water Resources Management Vol. 23, No. 14, pp: 3005-3018. Tarawneh Z., Elgaali E. and Hamdi M. (2008). Severity of droughts in arid regions. Jordan Journal of Civil Engineering, Vol 2, No.3, pp: 228-237. Tarawneh Z., Hadadin N. and Bdour A. (2008). Policies to Enhance Water Sector in Jordan. American Journal of Applied Sciences, Vol 5, No.6, p:698-704. Hamdi M., Bdour A. and Tarawneh Z. (2008). Developing reference crop evapotranspiration time series simulation model using class A pan: case study for the Jordan valley. Jordan Journal of Earth and Environmental Sciences, Vol. 1, No.1, pp: 33-44. Hamdi M., Bdour A. and Tarawneh Z. (2008). Diesel Quality in Jordan: Impacts of Vehicular and Industrial Emissions on Urban Air Quality. Environmental engineering science, Vol. 25, No.9, pp: 1333-1343. Hadadin N. and Tarawneh Z. (2007). Environmental Issues in Jordan, Solutions and Recommendations. American Journal of Environmental Sciences, Vol. 3, No.1, pp:30-36. Tarawneh z. and Salas J. (2006). Estimating the Return Period of Extreme Hydrologic Droughts. AGU Hydrology Days 2006, March 20 - March 22, 2006, Colorado State University, Fort Collins, CO, USA. Tarawneh Z. and Salas J. (2005). Characterizing Droughts for the Colorado River System. AGU Hydrology Days 2005, March 7 - March 9, 2005, Colorado State University, Fort Collins, CO, USA. Tarawneh Z., Salas J., Woodhouse C., Lukas J., Frevert D., Fulp T., and Callejo R. (2005). Extending the Streamflows of the Colorado River Based on Tree-Ring Data. The 60th Annual meeting of the Rocky Mountain Hydrologic Research Center, November 4, 2005, Fort Collins, CO, USA. Boerlage S., Kennedy M., Tarawneh Z., Faber R. and Schippers J. (2004). Development of the MFI-UF in constant flux filtration. Desalination, Vol. 161, page:103 – 114.
HUSAM AMJAD ABDEL KAREEM AL QABLAN	1. Atef Saleeb, Robert Y. Liang, Husam Al Qablan, and Dave Powers “On The Modeling and Characterization of The Viscoelastoplastic Response of Asphalt Concrete Mixtures”, International Journal of Pavements, Volume 3, Number 3, September, 2004, pp.14-27. 2. Saleeb, Atef; Liang, Robert Y; Qablan, Husam; Powers, Dave “Numerical Simulation Techniques for HMA Rutting Under Loaded Wheel Tester”, : International Journal of Pavement Engineering, Volume 6, Number 1, March, 2005, pp. 57-66. 3. Numayr, K.; Qablan, H. "Effect of Torsion and Warping on the Free Vibration of Sandwich Beams", Mechanics of Composite Materials, Volume 41, Number 2, March 2005, pp. 109-118(10) 4. Faisal Shalabi, Husam Al Qablan ,Omar Al-Hattamleh "Elasto-plastic Behavior of Raghadan Tunnel Based on RMR and Hoek–Brown Classifications" Geotechnical and Geological Engineering, Volume 27, Number 2, 2009 pp. 237-248. DOI 10.1007/s10706-008-9225-0 5. Taleb Rousan; Ibrahim Asi; Omar Al-Hattamleh; Husam Al Qablan "Performance of Asphalt Mixes Containing RAP" Jordan Journal of Civil Engineering, 2(3), 2008, pp 218-226. 6. Husam Al Qablan; Hasan Katkhuda; and Hazim Dwairi "Assessment of the Buckling Behavior of Square Composite Plates with Circular Cutout Subjected to In-Plane Shear" Jordan Journal of Civil Engineering, 3(2), 2009, pp 184-195. 7. Nasim Shatarat ; Samir Al-Sadder; Hasan Katkhuda; Husam Qablan; Anis Shatnawi "Behavior of A Rhombus Frame of Nonlinear Elastic Material Under Large Deflection" International Journal of Mechanical Sciences, 51, 2009, pp 166–177. 8. H. Katkhuda; N. Shatarat; H. Qablan "Damage Detection at Element Level in Structures with Different Support Conditions" Journal of Applied Sciences, 9 (21), 2009, pp 3906-3911. 9. Omar Al Hattamleh; Faisal AlShalabi; Husam Al Qablan; Taleb Al-Rousan "Effect of Grain Crushing and Bedding Plane Inclination on Aqaba Sand Behavior" Bulletin of Engineering Geology and the Environment, 69(1), 2010, pp 41-49. DOI 10.1007/s10064-009-0238-6. 10. Husam Al Qablan ; Hazim Dwairi ; Nasim Shatarat; Taleb Rosan; Tamara Al Qablan " Stability Analysis of Composite Panels with Stiffeners and Circular Cutouts" Jordan Journal of Civil Engineering, 4(2), 2010, pp 119-131. 11. Husam Al Qablan "Semi-Analytical Buckling Analysis of Stiffened Sandwich Plates" Journal of Applied Sciences, 10 (23), 2010, pp 2978-2988. 12. Luay Fraiwan, Khaldon Lweesy, Rami Oweis, Husam Al Qablan, Mamdouh Hasanat "Medical Waste Management Practices in Southern Jordan" International Journal of Environment and Waste Management, Accepted. 1. Atef Saleeb, Robert Y. Liang, Husam Al Qablan, and Dave Powers “On The Modeling and Characterization of The Viscoelastoplastic Response of Asphalt Concrete Mixtures”, International Journal of Pavements, Volume 3, Number 3, September, 2004, pp.14-27. 2. Saleeb, Atef; Liang, Robert Y; Qablan, Husam; Powers, Dave “Numerical Simulation Techniques for HMA Rutting Under Loaded Wheel Tester”, : International Journal of Pavement Engineering, Volume 6, Number 1, March, 2005, pp. 57-66. 3. Numayr, K.; Qablan, H. "Effect of Torsion and Warping on the Free Vibration of Sandwich Beams", Mechanics of Composite Materials, Volume 41, Number 2, March 2005, pp. 109-118(10) 4. Faisal Shalabi, Husam Al Qablan ,Omar Al-Hattamleh "Elasto-plastic Behavior of Raghadan Tunnel Based on RMR and Hoek–Brown Classifications" Geotechnical and Geological Engineering, Volume 27, Number 2, 2009 pp. 237-248. DOI 10.1007/s10706-008-9225-0 5. Taleb Rousan; Ibrahim Asi; Omar Al-Hattamleh; Husam Al Qablan "Performance of Asphalt Mixes Containing RAP" Jordan Journal of Civil Engineering, 2(3), 2008, pp 218-226. 6. Husam Al Qablan; Hasan Katkhuda; and Hazim Dwairi "Assessment of the Buckling Behavior of Square Composite Plates with Circular Cutout Subjected to In-Plane Shear" Jordan Journal of Civil Engineering, 3(2), 2009, pp 184-195. 7. Nasim Shatarat ; Samir Al-Sadder; Hasan Katkhuda; Husam Qablan; Anis Shatnawi "Behavior of A Rhombus Frame of Nonlinear Elastic Material Under Large Deflection" International Journal of Mechanical Sciences, 51, 2009, pp 166–177. 8. H. Katkhuda; N. Shatarat; H. Qablan "Damage Detection at Element Level in Structures with Different Support Conditions" Journal of Applied Sciences, 9 (21), 2009, pp 3906-3911. 9. Omar Al Hattamleh; Faisal AlShalabi; Husam Al Qablan; Taleb Al-Rousan "Effect of Grain Crushing and Bedding Plane Inclination on Aqaba Sand Behavior" Bulletin of Engineering Geology and the Environment, 69(1), 2010, pp 41-49. DOI 10.1007/s10064-009-0238-6. 10. Husam Al Qablan ; Hazim Dwairi ; Nasim Shatarat; Taleb Rosan; Tamara Al Qablan " Stability Analysis of Composite Panels with Stiffeners and Circular Cutouts" Jordan Journal of Civil Engineering, 4(2), 2010, pp 119-131. 11. Husam Al Qablan "Semi-Analytical Buckling Analysis of Stiffened Sandwich Plates" Journal of Applied Sciences, 10 (23), 2010, pp 2978-2988. 12. Luay Fraiwan, Khaldon Lweesy, Rami Oweis, Husam Al Qablan, Mamdouh Hasanat "Medical Waste Management Practices in Southern Jordan" International Journal of Environment and Waste Management, Vol. 11, No. 3, 2013, pp 255-266. 13. Shaher Rababeha, Husam Al Qablan, Shatha Abu-Khafajaha, Mohammad El-Mashaleh "Structural utilization of wooden beams as anti-seismic and stabilising techniques in stone masonry in Qasr el-Bint, Petra, Jordan" Construction and Building Materials, Volume 54, 15 March 2014, pp 60–69. doi.org/10.1016/j.conbuildmat.2013.12.018 14. Shaher Rababeh, Husam Al Qablan, Mohammad El-Mashaleh "Utilization of tie-beams for strengthening stone masonry arches in Nabataean construction" Journal of Architectural Conservation, Volume 19, Issue 2, 2013, pp 118-130. doi.org/10.1080/13556207.2013.819656 15. Hazim Dwairi, Husam Al Qablan, Hasan Katkhuda “Shear strength modelling of deep beam reinforced with high-strength steel without stirrups” Proceedings of the Institution of Civil Engineers-Structures and Buildings, Volume 171 Issue 4, April, 2018, pp. 338-347 http://dx.doi.org/10.1680/jstbu.17.00009. 16. Husam Al Qablan, Shaher Rababeh, Hasan Katkhuda, Tamara Al-Qablan, On the use of wooden beams as an anti-seismic device in stone masonry in Qasr el-Bint, Petra, Jordan, Journal of Building Engineering, 21 (2019) 82–96. doi.org/10.1016/j.jobe.2018.10.002 17. Husam Al Qablan, Hazim Dwairi, Omar Al Hattamleh, Samer Rabab’ah, Simplified Buckling Analysis of Stiffened Laminated Sandwich Plates, Composites: Mechanics, Computations, Applications: An International Journal, 10 (2019), 69–91. DOI: 10.1615/CompMechComputApplIntJ.2018027696 18. Hazim Dwairi; Omar Al Hattamleh; Husam Al Qablan. Evaluation of live-load distribution factors for high-performance prestressed concrete girder bridges. Bridge Structures 2019, 15, 15–26, doi:10.3233/BRS-190149. 19. Omar Al Hattamleh, Samer Rabab’ah, Hussein Aldeeky, and Husam Al Qablan. 2019. “Evaluating Aqaba Marine Sand Geotextile Interface Shear Strength Evaluating Aqaba Marine Sand Geotextile Interface Shear Strength.” International Journal of Geotechnical Engineering 00 (00): 1–12. https://doi.org/10.1080/19386362.2019.1651985 20. Samer Rabab’ah, Omar Al Hattamleh, Hussein Aldeeky, Mohammad Aljarrah, Husam Al Qablan. Resilient Response and Permanent Strain of Subgrade Soil Stabilized with Byproduct Recycled Steel and Cementitious Materials. Journal of Materials in Civil Engineering 2020, 32, 04020139, doi:10.1061/(asce)mt.1943-5533.0003211. 21. Husam Al Qablan, Samer Rabab’ah, Bilal Abu Alfoul, Omar Al Hattamleh. Semi-empirical buckling analysis of perforated composite panel. Mechanics Based Design of Structures and Machines 2020, 0, 1–18, doi:10.1080/15397734.2020.1784198. 22. Bilal Abu Alfoul, Hazim Dwairi, Husam Al Qablan, Samer Rabab’ah. Investigating the effect of waste polystyrene dissolved in paint thinner product as an admixture and coating sealer on concrete properties. International Review of Civil Engineering 2021, 12, 305–313, doi:10.15866/irece.v12i5.19451. 23. Husam Al Qablan. Applicable Formulas for Shear and Thermal Buckling of Perforated Rectangular Panels. Advances in Civil Engineering. Volume 2022, Article ID 3790462. doi.org/10.1155/2022/3790462
OMAR HMOUD SULEIMAN AL HATTAMLEH	Selected Publications 1. Omar Al Hattamleh, B. Muhunthan and Faisal Shalabi (2009)" fabric anisotropy and strain localization of granular media under simple shear" International Journal for Numerical and Analytical Methods in Geomechanics. Volume 33 Issue 9, Pages 1255 – 12752. 2. Omar Al Hattamleh, Faisal AlShalabi, Husam Al Qablan and Taleb Al-Rousan (2010). Effect of grain crushing and bedding plane inclination on Aqaba sand behavior. Bulletin of Engineering Geology and the Environment. Volume 69, Number 1 / February, 2010, Pages 41-49. DOI 10.1007/s10064-009-0238-6 3. F. Shalabi, H. Qublan, and O. Al Hattamleh (2008). "Elasto-Plastic behavior of Raghadan Tunnel based on RMR and Hoek-Brown Classifications" Geotechnical and Geological Engineering, Volume 27, Number 2 / April, 2009, Pages 237-248. DOI 10.1007/s10706-008-9225-0. 4. H. Aldeeky, O. Al Hattamleh and B. Abu Alfoul (2015) “Effect of Sand Placement Method on the interface friction of Sand and Geotextile” International Journal of Civil Engineering, March 2016, Volume 14, Issue 2, pp 133–138 5. H. Aldeeky and O. Al Hattamleh (2017)” Experimental study on the utilization of Fine Steel Slag as Waste Material on Stabilizing High Plastic Sub grade Soil” Advances in Civil Engineering, Volume 2017 (2017), Article ID 9230279, 11 pages; https://doi.org/10.1155/2017/9230279 6. Omar Al Hattamleh, Samer Rabab’Ah, Hussein Aldeeky & Husam Al Qablan (2019): Evaluating aqaba marine sand geotextile interface shear strength, International Journal of Geotechnical Engineering, DOI: 10.1080/19386362.2019.1651985
HAZIM MUSTAFA MOHAMMAD DWAIRI	Journal Papers: ----------------------------------------------------- [1] K. S. Numayr and H. M. Dwairi (2010). "Dynamic Response of Sandwich Plates Subjected to Impact Loading." Jordan Journal of Civil Engineering, 4 (3), 2010, pp. 231 - 252. [2] H. M. Dwairi, M. C. Wagner, M. J. Kowalsky, and Paul Zia (2010). “Behavior of Instrumented Prestressed High Performance Concrete Bridge Girders.” Journal of Construction and Building Materials, 24(11), pp. 2294-2311. [3] Husam Al-Qablan, Hazim Dwairi, Nasim Shatarat , Taleb Rosan and Tamara Al-Qablan (2010). “Stability Analysis of Composite Panels with Stiffeners and Circular Cutouts.” Jordan Journal of Civil Engineering, 4(2), pp. 119-131. [4] H. M. Dwairi and H. M. Duwairi (2010). “On The Vertical Velocity Component Effects on Sound Waves Propagation of a Stationary or Flowing Fluid in a Cylindrical Tube Filled With a Porous Media.” Journal of Porous Media, 13(3), pp. 249-259. [5] Hasan N. Katkhuda, Hazim M. Dwairi and Nasim Shatarat (2010). “System Identification of Steel Framed Structures with Semi-rigid Connections.” Structural Engineering and Mechanics, 34(3), pp. 351-366. [6] Husam Al Qablan, Hasan Katkhuda, and Hazim Dwairi (2009). “Assessment of the Buckling Behavior of Square Composite Plates with Circular Cutout Subjected to In-Plane Shear.” Jordan Journal of Civil Engineering, 3(2), pp. 184-195. [7] Hamzeh M. Duwairi and Hazim M. Dwairi(2009) .“Propagation of Sound Waves in a Cylindrical Tube Filled with a Porous Media.” Journal of Porous Media, 12(6), pp. 537-548. [8] Tarek K. Hassan, Hatem M. Seliem, Hazim Dwairi, Sami H. Rizkalla, and Paul Zia (2008). “Shear Behavior of Large Concrete Beams Reinforced with High-Strength Steel.” ACI Structural Journal, 105(2), pp. 173-179. [9] Hazim M. Dwairi (2008). “Analysis of Nonlinear Isentropic Sound Wave-Propagation in a Cylindrical Tube Filled with Fluid-Saturated Porous Media.” WSEAS Transaction on Fluid Mechanics. 3(1), pp. 68–75. [10] Dwairi, H. M., Kowalsky, M. J. and Nau, J. M. (2007). “Equivalent Damping in Support of Direct Displacement-based Design.” Journal of Earthquake Engineering. 11(5), pp. 1–9. [11] Dwairi, H. M. and Kowalsky, M. J. (2006). “Implementation of Inelastic Displacement Patterns in Direct Displacement-Based Design of Continuous Bridge Structures.” Earthquake Spectra. 22(3), pp. 631–662.
TALEB MUSTAFA TALEB AL-ROUSAN	Published Works Accepted and Published Refereed Publications: Ali F. Al-Shawabkeh , Mohammad T. Awwad, and Taleb M. Al-Rousan. 2023. Using Recycled Plastic waste to Improve the Performance of Hot-mix Asphalt. Proceedings of Institutions of Civil Engineering: Waste & Resource management. Volume 176, Issue 3, July, 2023, pp. 118-128. https://doi.org/10.1680/jwarm.21.00013 . [# of citations = 3] Hamza Alkuime , Emad Kassem; Taleb Al-Rousan ; Randa Oqab Mujalli , and Khaled A. Alshraiedeh. 2023. “Accounting for the Effect of Air Void on Asphalt Mix Monotonic Cracking Tests Results”. Journal of Testing and Evaluation. Volume 51, Issue 6. Published online 2/6/2023. https://doi.org/10.1520/JTE20220694. [# of citations = 1] Al-Rousan, T., Al Hattamleh, O., Abu Alfoul, B., and Alkuime, H. 2022. “Investigating the Variations in Crushers’ Daily Production Using Imaging Technique”. Int. J. Pavement Res. Technol . 15, 1195–1208. https://doi.org/10.1007/s42947-021-00082-6 . [# of citations = 2] Al-Omari, A.A., Al-Rousan, T.M. and Al-Facara, E.S. 2022. “Laboratory Characterization of Pozzolan-Modified Asphalt Binder”. Int. J. Pavement Res. Technol. 15, 1051–1061 (2022). https://doi.org/10.1007/s42947-021-00071-9 . [# of citations = 0] 4 Al-Rousan, T. Omar Al Hattamleh, and Bilal Abu Alfoul. 2022. Examining the Influence of Aggregate Shape Properties Measured Using Imaging Technique on the Flexural Strength of Concrete. International Review of Civil Engineering (IRECE). Vol. 13, no. 2, pp. 99-107.. https://doi.org/10.15866/irece.v13i2.20891 . [# of citations = 0] Bilal Abu Alfoul, Taleb Al-Rousan, Maha Alkasasbeh, Samer Rababah, and Yahia Khalayleh. 2021. “Strength and Strain Sustainability of Concrete with FortA – Fi Fiber”. AIP Conference Proceedings 2441, 030007 (2021); https://doi.org/10.1063/5.0072549 Published Online: 19 November 2021. [# of citations = 0] Al-Rousan, T.M., Umar, A.A., Al-Omari, A. A., Khalaylah, Y. A., Hamza Alkuime, H.M. and Al-Rousan, A.H. 2021.”A Scoping Study on Driver’s Perspective of Distracting Factors”. Infrastructures, 6, no. 10, 139; https://doi.org/10.3390/infrastructures6100139 . [# of citations = 1] Al-Rousan, T. M., and Umar, A. A. 2021.”Assessment of Traffic Sign Comprehension Levels among Drivers in the Emirate of Abu Dhabi, UAE”. Infrastructures 6, no. 9: 122. https://doi.org/10.3390/infrastructures6090122 . [# of citations = 8] Al-Rousan, Taleb M., Umar, Abdullahi A., and Al-Omari, Aslam A. 2021. "Characteristics of Crashes Caused by Distracted Driving on Rural and Suburban Roadways in Jordan". Infrastructures 6, no. 8: 107. https://doi.org/10.3390/infrastructures6080107 . [# of citations = 13] Shawaqfah, Moayyad; Almomani, Fares; Al-Rousan, Taleb. 2021. "Potential Use of Treated Wastewater as Groundwater Recharge Using GIS Techniques and Modeling Tools in Dhuleil-Halabat Well-Field/Jordan". Water 13, no. 11: 1581. https://doi.org/10.3390/w13111581. [# of citations = 10] Al-Omari, Aslam A., Khasawneh, Mohammad A., and Al-Rousan, Taleb M., and AlTheeb, Saja F. 2021. “Static creep of modified superpave asphalt concrete mixtures using crumb tire rubber, microcrystalline synthetic wax, and nano-silica”. International Journal Of Pavement Engineering 22, no. 6, 794–805. https://doi.org/10.1080/10298436.2019.1646913 (Published online: 29 Jul 2019). [# of citations = 14] Randa O. Mujalli, Laura Garach, Griselda L?pez, and Taleb Al-Rousan. 2019. “Evaluation of Injury Severity for Pedestrian-Vehicle Crashes Using Extracted Rules”. Journal of Transportation Engineering, Part A: Systems 145, no. 7, 04019028-1-13. https://doi.org/10.1061/JTEPBS.0000244. [# of citations = 23] 5 Umar, A. A., Zawawi, N. A., Abdul-Aziz, A.-R., & Al-Rousan, T. M. 2016. “Regulating PPP projects in the Energy Sector: An exploratory survey of skills required”, International Journal of Thermal & Environmental Engineering 11, no. 2, pp 105-110. http://iasks.org/wpcontent/uploads/pdf/IJTEE-1102004.pdf. DOI: 10.5383/ijtee.11.01.004 Al-Rousan, T., Al-Hattamleh, O., and Al Dwiri, R. (2011). "Effect of Inherent Anisotropy on Shear Strength Following Crushing of Natural Aqaba Subgrade Sand ". Jordan Journal of Civil Engineering 5, no. 3, pp 431-445. https://jjce.just.edu.jo/issues/paper.php?p=2167.pdf [# of citations = 10] Al-Rousan, T., Asi, I., and Abu Baker, A. 2010. “Roughness Evaluation Of Jordan Highway Network”. The 24th ARRB Conference Proceedings, Oct. 12-15 (2010), Melbourne, Australia. https://trid.trb.org/view/1096875 https://eis.hu.edu.jo/Deanshipfiles/conf10471325.pdf [# of citations = 12] Al Qablan, H., Dwairi, H., Shatarat, N., Al-Rousan, T., and Al Qablan, T. 2010. " Stability Analysis of Composite Pannels with Stiffeners and Circular Cutouts". Jordan Journal of Civil Engineering 4, no. 2, pp 119-131. https://jjce.just.edu.jo/issues/paper.php?p=114.pdf [# of citations = 12] Al-Hattamleh, O., Al-Shalabi, F., Al Qablan, H., and Al-Rousan, T. 2010." Effect of Grain Crushing and Bedding Plane Inclination on Aqaba Sand behavior". Bulletin of Engineering Geology and the Environment 69, no. 1, pp.41-49. https://doi.org/10.1007/s10064-009-0238-6 https://link.springer.com/article/10.1007/s10064-009-0238-6 [# of citations = 16] Al Dwiri, R., Al-Hattamleh, O., Al-Shalabi, F., and Al-Rousan, T. 2009."Effect of Grain Crushing and Bedding Plane Inclination on Ras en-Naqap Natural Sand behavior", Electronic Journal of Geotechnical Engineering (EJGE) Vol.14 bundle L. (http://www.ejge.com/2009/Ppr0996/Ppr0996.pdf). https://eis.hu.edu.jo/deanshipfiles/pub105353080.pdf [# of citations = 3] Al-Rousan, T., Asi, I., Al-Hattamleh, O., and Al-Qablan, H. 2008. " Performance of Asphalt Mixes Containing RAP"," Jordan Journal of Civil Engineering 2, no. 3, pp. 218-227. https://jjce.just.edu.jo/issues/paper.php?p=53.pdf [# of citations = 51] Masad, E., Al-Rousan, T., Bathina, M., McGahan, J., and Spiegelman, C. 2007. “Analysis of Aggregate Shape Characteristics and its Relationship to Hot Mix Asphalt Performance,” Road Materials and Pavement Design 8, no. 2, pp. 317-350. https://doi.org/10.1080/14680629.2007.9690077. [# of citations = 40] 6 Al-Rousan, T., Masad, E., Tutumluer, E., and Pan, T. 2007. “Evaluation of Image Analysis Techniques for Quantifying Aggregate Shape Characteristics,” Journal of Construction and Building Materials 21, no. 5, pp. 978 – 990. https://doi.org/10.1016/j.conbuildmat.2006.03.005 [# of citations =323] Al-Rousan, T., Masad, E., Myers, L., and Spiegelman, C. (2005). “A New Methodology for Shape Classification of Aggregates,” In Transportation Research Record 1913, Journal of the Transportation Research Board, pp. 11-23. https://doi.org/10.1177/0361198105191300102 .[# of citations = 74] Masad, E., Saadeh, S., Al-Rousan, T., Garboczi, E., and Little, D. 2005. “Computations of Particle Surface Characteristics Using Optical and X-Ray CT Images,” Journal of Computational Materials Science 34, no. 4, pp. 406-424. https://doi.org/10.1016/j.commatsci.2005.01.010 [# of citations = 166] Hamed, M., Al-Rousan, T. (1998) “The Impact of Perceived Risk on Urban Commuters Route Choice”. Road and Transportation Research 7, no. 4. https://search.proquest.com/docview/215248731?pq-origsite=gscholar&fromopenview=true [# of citations = 10]
KHALIED HESHAM RADWAN HYARI	PUBLICATIONS A) REFREED JOURNALS El-Rayes, K., and Hyari, K. (2003) “Conlight: A Lighting Design Model for Nighttime Highway Construction,” Accepted for publication in the Journal of Construction Engineering and Management, ASCE. El-Rayes, K., and Hyari, K. (2003) “Optimizing Lighting Conditions for Nighttime Highway Construction Operations,” submitted to the Journal of Construction Engineering and Management, ASCE. Hyari, K. and El-Rayes, K (2003) “Field Experiments to Evaluate Lighting Performance in Nighttime Work Zones” submitted to the Journal of Transportation Engineering, ASCE. B) REFREED CONFERENCE PROCEEDINGS Hyari, K. and El-Rayes, K. (2003) “A Multi-Objective Model for Optimizing Construction Planning of Repetitive Infrastructure Projects” Proceedings of the Xth International Conference on Computing in Civil and Building Engineering, Weimar, Germany, June 2-4, 2004. Hyari, K (2003) “Striking a Balance: Optimizing Nighttime Construction Lighting to Satisfy Multiple Objectives” Proceedings of the PhD Research Symposium, ASCE Construction Research Council, Nashville, Tennessee, November 12-15, 2003. El-Rayes, K. and Hyari, K. (2003) “Lighting Design for Highway Nighttime Construction Operations.” Proceedings of the Second International Structural Engineering and Construction Conference, ISEC 02, Rome, Italy, September 23-26, 2003. El-Rayes, K. and Hyari, K. (2003) “Lighting Design Requirements for Highway Nighttime Construction.” Proceedings of the ASCE Construction Research Congress, Honolulu, Hawaii, March 19-21, 2003. El-Rayes, K. and Hyari, K. (2002) “Automated DSS for Lighting Design of Nighttime Operations in Highway Construction Projects.” Proceedings of the 19th International Symposium on Automation and Robotics in Construction, ISARC, Washington, DC, September 23-25, 2002.
HASAN NABIL MOH'D KATKHUDA	Publications in Refereed Journals: Mu’tasim Abdel-Jaber, Nasim Shatarat, Hasan Katkhuda, Hebah Al-zu’bi, Rawand Al-Nsour, Rouzan Alhnifat, Ahmad Al-Qaisia (2023), Influence of Temperature on Shear Behavior of Lightweight Reinforced Concrete Beams Using Pozzolana Aggregate and Expanded Polystyrene Beads. CivilEng. 4 (3), pp.1036-1051. https://doi.org/10.3390/civileng4030056 1. Abdel-Jaber M., Abdel-Jaber M.S., Katkhuda H., Shatarat N., Sulaiman A., El-Nimri R. (2022) "Influence of Stirrups Spacing on the Strengthening and Rehabilitating of RC T-beams Using Near Surface Mounted Carbon Fiber Reinforced Polymer Strips." Fibers, 10(12), 103; https://doi.org/10.3390/fib10120103 . 2. Shatarat N., Katkhuda H., Ayyoub M., Al-Hunaiti Y., AbdelJaber M.S (2022), "Improving Bond Strength of Recycled Coarse Aggregate Concrete Using Chopped Basalt Fibers." Case Studies in Construction Materials, Elsevier, vol. 17, e01449. https://doi.org/10.1016/j.cscm.2022.e01449 3. Al-zu’bi H., Abdel-Jaber, Katkhuda H. (2022), “Flexural Strengthening of Reinforced Concrete Beams with Variable Compressive Strength Using Near Surface Mounted Carbon Fiber Reinforced Polymer Strips [NSM-CFRP]”, Fibers, 10(10), 86; https://doi.org/10.3390/fib10100086 4. Alzaben G., Shatarat N., Katkhuda H. (2022), “Comparison of capacity curves of reinforced concrete buildings using ADINA moment-curvature element and SAP2000 lumped plasticity model” Mechanics Based Design of Structures and Machines, an international journal. Taylor and Francis. https://doi.org/10.1080/15397734.2022.2126984 5. Saleh E., Tarawneh A., Katkhuda H. (2022),"A Comprehensive Evaluation of Existing and New Model-identification approaches for Non-destructive Concrete Strength Assessment". Journal of Construction and Building Materials, Elsevier, vol. 334, 127447. https://doi.org/10.1016/j.conbuildmat.2022.127447 6. Abdel Jaber M.S., Abdel Jaber M., El-Nimri R., Katkhuda H. (2022), "Investigation of Flexural Capacity of Normal and Recycled Aggregate Concrete Filled Steel Tubes". The Open Civil Engineering Journal, vol. 16. DOI: 10.2174/18741495-v16-e2202020 7.Beramly M., Abdel Jaber M., Katkhuda H., Shatarat N., Al-diseet M. (2022), "Shear Strengthening and Rehabilitating of Reinforced Concrete T-Beams Using Eternally Carbon Fiber Reinforced Polymer Sheets. Journal of Applied Engineering Science. Vol. 20, No. 2, 956, 498-510. https://doi.org/10.5937/jaes0-34390 8.Abdel-Jaber M., Abdel-Jaber M.S., Katkhuda H., Shatarat N., El-Nimri R. (2021),"Influence of Compressive Strength of Concrete on Shear Strengthening of Reinforced Concrete Beams with Near Surface Mounted Carbon Fiber-Reinforced Polymer", Buildings, 11(11), 563. https://doi.org/10.3390/buildings.11110563 9. Arabiyat S., Abdel Jaber M., Katkhuda H., Shatarat N. (2021),"Influence of Using Two Types of Recycled Aggregates on Shear Behavior of Concrete Beams", Journal of Construction and Building Materials, Elsevier, volume 279, 122475. https://doi.org/10.1016/j.conbuildmat.2021.122475 10. Abedalqader A., Shatarat N., Ashteyat A., and Katkhuda H. (2021)," Influence of Temperature on Mechanical Properties of Recycled Asphalt Pavement Aggregate and Recycled Coarse Aggregate Concrete, Journal of Construction and Building Materials, Elsevier, volume 269, 121285. 11. Shatarat N., Hunifat R., Murad Y., Katkhuda H., and Abdel Jaber M. (2020)," Torsional Capacity Investigation of Reinforced Concrete Beams with Different Configurations of Welded and Un-Welded Transverse Reinforcement", Structural Concrete Journal, Volume 21, No. 2, pp. 484-500. 12. Shatarat N., Abde Alhaq A., Katkhuda H., and Abdel Jaber M. (2019)," Investigation of axial compressive behavior of reinforced concrete columns using Recycled Coarse Aggregate and Recycled Asphalt Pavement aggregate", Journal of Construction and Building Materials, Elsevier, Volume 217, pp. 384-393. DOI: https://doi.org/10.1016/j.conbuildmat.2019.05.085 13. Katkhuda H., Shatarat N., and AL-Rakhameen A. (2019)," Improving the Torsional Capacity of Reinforced Concrete Beams with Spiral Reinforcement", International Journal of Structural and Civil Engineering Research, Vol. 8, No. 2, pp. 113-118. 14. Al Qablan H., Rababeh S., Katkhuda H., and Al-Qablan T. (2019), "On the Use of Wooden Beams as Anti-Seismic device in Stone Masonry in Qasr el-Bint, Petra, Jordan", Journal of Building Engineering, Elsevier, Volume 21, pp. 82-96. DOI: https://doi.org/10.1016/j.jobe.2018.10.002 15. Shatarat N., Mahmoud H., and Katkhuda H. (2018)," Shear Capacity Investigation of Self Compacting Concrete Beams with Rectangular Spiral Reinforcement", Journal of Construction and Building Materials, Elsevier, Volume 189, pp. 640-648. DOI: https://doi.org/10.1016/j.conbuildmat.2018.09.046 16. Shatarat N., Katkhuda H., Hyari K., and Asi I. (2018)," Effect of using recycled coarse aggregate and recycled asphalt pavement on the properties of pervious concrete ", Structural Engineering and Mechanics: an International Journal, Techno press, Volume 67, No. 3, pp. 283-290. DOI: https://doi.org/10.12989/sem.2018.67.3.283 17. Dwairi H., Al Qablan H., and Katkhuda H., (2018)," Shear strength modelling of deep beam reinforced with high-strength steel without stirrups", Proceedings of the Institution of Civil Engineers - Structures and Building, Volume 171, No. 4, pp. 338-347. DOI: https://doi.org/10.1680/jstbu.17.00009 18. Tarawneh Z., Hyari H., and Katkhuda H. (2017),"Evaluating the Characteristics of Multiyear Extreme Droughts in Semi-Arid Regions", Environmental Processes, Springer, Volume 4, No.3, pp. 683-696. DOI: https://doi.org/10.1007/s40710-017-0246-7 19. Katkhuda H., Shatarat N., and Hyari K.(2017)," Damage Detection in Steel Structures with Semi-rigid Connections Using Unscented Kalman Filter", International Journal of Structural Integrity, Emerald Group Publishing Limited, Volume 8, No. 2, pp. 222-239. DOI: https://doi.org/10.1108/IJSI-04-2016-0014 20. Katkhuda H., Shatarat N. (2017), "Improving the Mechanical Properties of Recycled Concrete Aggregate Using Chopped Basalt Fibers and Acid Treatment ", Journal of Construction and Building Materials, Elsevier, 140, pp. 328-335. DOI: http://dx.doi.org/10.1016/j.conbuildmat.2017.02.128 21. Katkhuda H., Shatarat N., and Hyari K.(2017)," Effect of Silica Fume on Mechanical Properties of Concrete Containing Recycled Asphalt Pavement", Structural Engineering and Mechanics: an International Journal, Techno press, Volume 62, No. 3, pp. 357-364. DOI: http://dx.doi.org/10.12989/sem.2017.62.3.357 22. Katkhuda H., Shatarat N., and Hyari K. (2017),"Two Stage System Identification Approach for Three Dimensional Structural Systems", International Journal of Structural Engineering, Inderscience publisher, Volume 8, No.2, pp. 93-110. DOI: https://doi.org/10.1504/IJSTRUCTE.2017.084628 23. Katkhuda H., Shatarat N. (2016), "Shear Behavior of Reinforced Concrete Beams using treated Recycled Concrete Aggregate", Journal of Construction and Building Materials, Elsevier, 125, pp.63-71. DOI: http://dx.doi.org/10.1016/j.conbuildmat.2016.08.034 24. Hyari K., Khelifi A., and Katkhuda H. (2016),"Multiobjective Optimization of Roadway Lighting Projects", Journal of Transportation Engineering, ASCE, Volume 142, No. 7. DOI: http://dx.doi.org/10.1061/(ASCE)TE.1943-5436.0000853 25. Hyari K., Tarawneh Z., and Katkhuda H. (2016), "Detection Model for Unbalanced Pricing in Construction Projects: A Risk-Based Approach", Journal of Construction Engineering and Management, ASCE, Volume 142, No. 12. DOI: http://dx.doi.org/10.1061/(ASCE)CO.1943-7862.0001203 26. Nasim Shatarat, Hasan Katkhuda, Mu’tasim Abdel-Jaber, Maha Alqam (2016)," Experimental Investigation of Reinforced Concrete Beams with Spiral Reinforcement in Shear", Journal of Construction and Building Materials, Elsevier, 125, pp.585-594. DOI: http://dx.doi.org/10.1016/j.conbuildmat.2016.08.070 27. Katkhuda H. (2013), "A Time Domain Approach for Identifying Dynamic Forces Applied on Structures", Jordan Journal of Civil Engineering, Volume 7, No. 3, pp. 259-269. 28. Hanayneh B., Shatarat N., and Katkhuda H.(2012),“Improving Durability of Concrete to Phosphoric Acid Attack”, Jordan Journal of Civil Engineering, Volume 6, No. 1, pp. 68-82. 29. Katkhuda H., Dwairi H., and Shatarat N. (2010), “System Identification of Steel Framed Structures with Semi-rigid Connections", Structural Engineering and Mechanics, Techno press, Volume 34, Number 3, pp. 351-366. 30. Katkhuda H., Hanayneh B. and Shatarat N. (2010), “Effect of Microsilica and Water proofer on Resistance of Concrete to Phosphoric Acid Attack”, Jordan Journal of Civil Engineering, Volume 4, No. 4, pp. 426-438. 31. Shatarat N., Hanayneh B. and Katkhuda H (2010), “An Analytical Approach of the Behavior of Fiber Reinforced High Shrinkage Materials”, Journal of Applied Sciences, Volume 10, No. 15, pp. 1580-1587. 32. Shatarat N., Al-Sadder S., Katkhuda, H., Qablan H. and Shatnawi A. (2009), "Behavior of a Rhombus Frame of Nonlinear Elastic Material under Large Deflection", International Journal of Mechanical Sciences, Elsevier, (51), pp. 166-177. 33. Katkhuda, H., Shatarat N. and Qablan H. (2009), "Damage Detection at Element Level in Structures with Different Support Conditions", Journal of Applied Sciences, Volume 9, No.21, pp. 3906-3911. 34. Husam Al Qablan, Hasan Katkhuda and Hazim Dwairi (2009), "Assessment of the Buckling Behavior of Square Composite Plates with Circular Cutout Subjected to In-Plane Shear", Jordan Journal of Civil Engineering, Volume 3, No. 2, pp. 184-195. 35. Haldar A., Martinez-Flores, R., and Katkhuda, H. (2008), "Crack Detection in Existing Structures Using Noise-Contaminated Dynamic Responses", Theoretical and Applied Fracture Mechanics Journal, Elsevier, (50), pp. 74-80. 36. Martinez-Flores, R., Katkhuda, H., and Haldar, A. (2008), “A Novel Health Assessment Technique with Minimum Information: Verification,” International Journal of Performability Engineering, Vol. 4, No. 2, pp. 121-140. 37. Katkhuda, H., and Haldar, A. (2008), “A Novel Health Assessment Technique with Minimum Information,” Structural Control and Health Monitoring Journal, Vol. 15, No. 6, pp. 821-838. 38. Katkhuda, H., and Haldar, A. (2006), "Defect Identification under Uncertain Blast Loading," Optimization and Engineering Journal, Vol. 7, No. 3, pp. 277-296. 39. Katkhuda, H., Flores, R.M., and Haldar, A. (2005), "Health Assessment at Local Level With Unknown Input Excitation," Journal of the Structural Engineering, ASCE, Vol. 131, No. 6, pp. 956-965. 40. Katkhuda, H., Flores, R.M., and Haldar, A. (2004), "A Novel Defect Identification And Structural Health Assessment Technique," Journal of Structural Engineering, Special issue on Advances in Health Monitoring/Assessment of Structures including Heritage and Monument Structures, Vol. 31, No. 1, pp. 1-8. International Conferences: 1. Katkhuda H., Shatarat N., and AL-Rakhameen A.," Improving the Torsional Capacity of Reinforced Concrete Beams with Spiral Reinforcement", 6th International Conference on Civil and Urban Engineering (ICCUE 2019), Leuven, Belgium. 2. Katkhuda H., Hanayneh B. and Shatarat N.," Influence of Silica Fume on High Strength Lightweight Concrete", International Conference on Civil and Environmental Engineering (ICCEE'09), Venice, Italy, 28-30 October 2009, pp. 398-405. 3. Katkhuda, H., Martinez-Flores, and Haldar, A., “A Novel Structural Health Assessment Technique using Noise-Contaminated Limited Response Information,” 10th International Conference on Structural Safety and Reliability (ICOSSAR'09), Paper No. ICOSSAR2009: 0058, 2009. 4. Haldar, A., Katkhuda, H., and Martinez-Flores, R., “Structural Health Assessment at the Element Level,” International Conference Mesomechanics, Giza, Egypt, January 28 – February 1, 2008, Paper No. M-46. 5. Katkhuda, H., Shatarat N., and Abdel-Jaber M., "System Identification in Plane Steel Frames with Semi-Rigid Supports," 6th International Conference of Steel and Aluminum Structures (ICSAS'07), Oxford, UK, 24-27 July, 2007, pp. 915-922. 6. Al-Sadder S.Z., Othman R.A, Shatanawi A.S., Abdel-Jaber M.T., Katkhuda H.N, and Ahmed N., " Dynamic Behavior of Slender Beams Under Large Deflection by Method of Characteristics", 6th International Conference of Steel and Aluminum Structures (ICSAS'07), Oxford, UK, 24-27 July, 2007, pp. 254-265. 7. Haldar, A., Martinez-Flores, R., and Katkhuda, H., “Verifications of a Novel Structural Health Assessment Technique,” 10th International Conference on Applications of Statistics and Probability (ICASP10-2007), Japan, 2007. 8. Haldar, A., Martinez-Flores, R., and Katkhuda, H., “Health Assessment of Structures under Uncertainty,” Health Monitoring of Structure, Material & Environment, Southeast University, Nanjing, China, October 16-18, pp. 195-201, 2007. 9. Martinez-Flores, R., Haldar, A., and Katkhuda, H., “Issues in Kalman Filter-based Damage Evaluation at the Element Level without Excitation Information,” World forum on Smart Materials and Smart Structures Technology (SMSST’07), Chongqing and Nanjing, China, May 22-27, 2007. 10. Martinez-Flores, R., Haldar, A., and Katkhuda, H., "Structural Health Assessment After an Impact," Paper No. IMECE 2006-13718, American Society of Mechanical Engineering, 2006. 11. Hadid, H. and Katkhuda H., "Wind Load Analysis of Cantilever Cylindrical Tanks with Variable Thickness", 4th Jordanian Civil Engineering Conference, 28-30 March, 2006, Amman, Jordan, 12. Haldar, A., Martinez-Flores, R., and Katkhuda, H., "Structural Health Assessment Using Minimum Information under Uncertainty," Keynote Lecture, Structural Engineering Convention, Indian Institute of Science, Bangalore, India, pp. 57-71, December, 2005. 13. Katkhuda, H., Haldar, A., and Flores, R.M., “System Identification Under Uncertainty,” 9th International Conference On Structural Safety And Reliability (ICOSSAR'05), June, 2005. 14. Flores, R.M., Haldar, A., and Katkhuda, H., “Experimental Verification of a Structural Health Assessment Technique,” 9th International Conference on Structural Safety and Reliability (ICOSSAR'05), June, 2005. 15. Katkhuda, H., and Haldar, A., "Defect Detection At Local Level Using Sub-Structure Model With Unknown Input Excitation," 9th ASCE EMD/SEI/GI/AD Joint Specialty Conference on Probabilistic Mechanics and Structural Reliability, Albuquerque, New Mexico, July 26-28, 2004, (CD-ROM). 16. Katkhuda, H., Martinez, R. F., and Haldar, A., "Stiffness Identification Under Uncertain Blast Loading," Third International Symposium on Uncertainty Modeling and Analysis, University of Maryland, College Park, Maryland, September 21-24, 2003, pp. 22-27. Book Chapters: 1. Katkhuda, H., and Haldar, A., "Chapter 13- Structural Health Assessment Under Uncertainty", Recent Developments in Reliability-Based Civil Engineering, edited by A. Haldar, World Scientific Publishing Co., 2006. 2. Katkhuda, H., and Haldar, A., "Chapter 21 - System Identification at Local Level under Uncertainty", Applied Research In Uncertainty Modeling And Analysis, Edited by N. O. Attoh-Okine and B.M. Ayyub, Springer Science Publishers, New York, pp. 461-490, 2005.
SUZAN OMAR AHMED ALBATAINEH
BILAL ALI IBRAHIM ABU ALFOUL	• • Al-Akhras, Nabil M., Abu Alfoul, Bilal A. “Effect of Wheat Straw Ash on Mechanical Properties of Autoclaved Mortar” Cement and Concrete Research. Vol. 32, issue 6, 2002, pages 859 – 863. • Robert Y. Liang, Bilal A. Abu Alfoul, Mohammad Khasawneh “Laboratory Investigation of Anisotropic Behavior of HMA” Conference Proceeding of 2006 International Conference on Perpetual Pavement. • Robert Y. Liang, Atef Saleeb, Husam Al Qablan, Bilal Abu Alfoul, Dave Powers, and Roger Green “Mechanistic Evaluation of Georgia Loaded Wheel Tester and Its Implications” International Conference on Highway Pavement (ICHP) Data, Analysis and Mechanistic Design Applications. 7 – 10 Sep. 2003. Vol. I, pp. 115 – 130. • Hussein Aldeeky, Omar Al Hattamleh & Bilal Abu Alfoul “Effect of Sand Placement Method on the Interface Friction of Sand and Geotextile” International Journal of Civil Engineering, 2016. • Bilal Abu Alfoul, Omar Al Hattamleh & Hussein Aldeeky “Investigating the effects of disc shaped thumb tacks as a “fiber” reinforcement on various concrete properties” Case studies in Construction Materials. Vol. 11, 2019 ? Husam Al Qablan, Samer Rabab’ah, Bilal Abu Alfoul, and Omar Al Hattamleh “Semi-empirical buckling analysis of perforated composite panel” Mechanics Based Design of Structures and Machines. 2020 ? Samer Rabab’aha, Omar Al Hattamleh, Hussein Aldeeky, Bilal Abu Alfoul “Effect of glass fiber on the properties of expansive soil and its utilization as subgrade reinforcement in pavement applications” Case studies in Construction Materials. Vol. 14, 2021 ? Al-Rousan, T., Al Hattamleh, O., Abu Alfoul, B. and Alkuime H. Investigating the Variations in Crushers’ Daily Production Using Imaging Technique. International Journal of Pavement Research and Technology. (2021). https://doi.org/10.1007/s42947-021-00082-6
MAHA REDA ABDELGANI ALKASISBEH	• Mujalli, R. O., Alawadi, R., Al-Kasasbeh, M., & Tarawneh, A. (2023). Auto-oriented communities in developing countries: Bus Rapid Transit Implementation Prospects. Transportation Research Record: Journal of the Transportation Research Board. https://doi.org/10.1177/03611981231182716 • Randa Oqab Mujalli, Iqbal Marie & Maha Al-Kasasbeh (2023):Consequences of COVID-19 on Jordan’s construction sector using data mining techniques,International Journal of Construction Management, DOI: 10.1080/15623599.2023.2185944 • Al-Kasasbeh, M., Mujalli, R. O., Abudayyeh, O., Liu, H., & Altalhoni, A. (2022). Bayesian network models for evaluating the impact of safety measures compliance on reducing accidents in the construction industry. Buildings, 12(11), 1980. https://doi.org/10.3390/buildings12111980. • Al-Kasasbeh, M., Olimat, H., Abudayyeh, O., Al-Shboul, O., & Shehadeh, A. (2021). DEA-based multi-criteria selection model and framework for design-build contracting. International Journal of Management Science and Engineering Management, 17(1), 25–36. https://doi.org/10.1080/17509653.2021.1982422. • Al-Kasasbeh, M., Abudayyeh, O., Olimat, H., Liu, H., Al Mamlook, R., & Alfoul, B. A. (2021). A robust construction safety performance evaluation framework for workers’ Compensation Insurance: A proposed alternative to EMR. Buildings, 11(10), 434. https://doi.org/10.3390/buildings11100434. • Al-Kasasbeh, M., Abudayyeh, O., & Liu, H. (2021). An integrated decision support system for building asset management based on Bim and work breakdown structure. Journal of Building Engineering, 34, 101959. https://doi.org/10.1016/j.jobe.2020.101959 • Sulaiman, M., Sulaiman, M., Liu, H., Binalhaj, M., Al-Kasasbeh, M., & Abudayyeh, O. (2021). ICT-based Integrated Framework for smart facility management: An industry perspective. Journal of Facilities Management, 19(5), 652–680. https://doi.org/10.1108/jfm-11-2020-0084 • Al-Bayati, A. J., Al-Kasasbeh, M., Awolusi, I., Abudayyeh, O., & Umar, T. (2021). “Trends of Occupational Fatal and Nonfatal Injuries in Electrical and Mechanical Specialty Contracting Sectors: Necessity for a Learning Investigation System.” Journal of Construction Engineering and Management, 147(7). https://doi.org/10.1061/(asce)co.1943-7862.0002105. • Alshboul, O., Shehadeh, A., Al-Kasasbeh, M., Al Mamlook, R. E., Halalsheh, N., & Alkasasbeh, M. (2021). Deep and machine learning approaches for forecasting the residual value of heavy construction equipment: A management decision support model. Engineering, Construction and Architectural Management. 29(10) https://doi.org/10.1108/ecam-08-2020-0614. • Al-Kasasbeh, M., Abudayyeh, O., & Liu, H. (2020). A unified work breakdown structure-based framework for Building Asset Management. Journal of Facilities Management, 18(4), 437–450. https://doi.org/10.1108/jfm-06-2020-0035. • Rabia Al-Mamlook, Mohamed Bzizi, Maha Al-Kbisbeh, Tgarid Ali, Ekbal Almajiri. (2020). “Factors Affecting Labor Productivity in the Construction Industry.” American Journal of Environmental Science and Engineering.Vol. 4, No. 2, 2020, pp. 24-30. doi: 10.11648/j.ajese.20200402.13. • Alfoul, B. A., Al-Rousan, T., Alkasasbeh, M., Rababah, S., & Khalayleh, Y. (2021). Strength and strain sustainability of concrete with forta – fi fiber. The third International Conference on Civil, material, and Environmental Engineering(ICCME) (International Webinar)) 4TH-5TH APRIL 2021. https://doi.org/10.1063/5.0072549 • Chyad, A. M., Abudayyeh, O., & Alkasisbeh, M. R. (2021). A nonlinear regression-based machine learning model for predicting concrete bridge deck condition. Proceedings of the 1st International Congress on Engineering Technologies, 131–136. https://doi.org/10.1201/9781003178255-18. • AlMamlook, R. E., Kwayu, K. M., Alkasisbeh, M. R., & Frefer, A. A. (2019). Comparison of machine learning algorithms for predicting traffic accident severity. 2019 IEEE Jordan International Joint Conference on Electrical Engineering and Information Technology (JEEIT). https://doi.org/10.1109/jeeit.2019.8717393. • Al-Kasisbeh, M. R., & Abudayyeh, O. (2018). Development of work breakdown structure inventory framework for building assets. Construction Research Congress 2018. https://doi.org/10.1061/9780784481301.030. • Al-Kasisbeh, M. R., & Abudayyeh, O. (2018). Municipality asset management: Asset types and effective management decision using GIS. Construction Research Congress 2018. https://doi.org/10.1061/9780784481295.028. • Al-Kasisbeh, Maha R. and Abudayyeh, Osama. (2018). “Building Asset Management System: A Performance Evaluation Approach, ” Institute of Industrial and Systems Engineers (IISE) Annual Conference, Orlando, FL, May 2018. • Al-Kasisbeh, Maha R., Almamlook Rabia M., Al-Kasasbeh, Muna R., Alshammari, Muteb. (2018). Implementation of Six Sigma Tools in Building Construction, Industrial Engineering and Operations Management Paris, France, July 2018
RANDA OQAB MOHAMMAD MUJALLI	Published Papers at indexed Journals: o Juan de O?a1, Randa Oqab Mujalli1, Francisco J. Calvo. Analysis of traffic accident injury severity on Spanish rural highways using Bayesian networks. Accident Analysis and Prevention, Vol.43, Issue 1, January 2011, 402-411. o Randa Oqab Mujalli and Juan de O?a. A method for simplifying the analysis of traffic accidents injury severity on two-lane highways using Bayesian networks. Journal of Safety Research, Vol.42, 2011, 317 –326. o Randa Oqab Mujalli and Juan de O?a. Injury severity models for motorized vehicle accidents: A review. In: Proceedings of the Institution of Civil Engineers – Transport, Vol. 166, Issue 5, 2012, 255 –270. o Juan de O?a, Griselda L?pez, Randa Mujalli, Francisco J. Calvo. Analysis of traffic accidents on rural highways using Latent Class Clustering and Bayesian Networks. Accident Analysis and Prevention, Vol. 51, 2013, 1– 10. Coference Comunications: o Randa Mujalli, Juan de O?a. Analyzing Traffic Accidents using Bayesian networks. IRF 2010, Lisbon (Portugal). o Randa Mujalli, Juan de O?a, Griselda L?pez, Laura Garach, Francisco J. Calvo. Analysis of traffic accidents injury severity on two-lane highways using simplified Bayesian networks. 10th Transport Engineering Conference, CIT 2012, 20- 22 June, 2012, Granada (Spain). o Laura Garach, Juan de O?a, Randa Mujalli, Rocio de O?a, Griselda L?pez. An?lisis de la consistencia seg?n distintos modelos en carreteras convencionales. 10th Transport Engineering Conference, CIT 2012, 20- 22 June, 2012, Granada (Spain). o Griselda L?pez, Juan de O?a, Rocio de O?a, Randa Mujalli, Laura Garach. An?lisis de la severidad de los accidentes de tr?fico mediante técnicas paramétricas y no paramétricas. 10th Transport Engineering Conference, CIT 2012, 20- 22 June, 2012, Granada (Spain).
NEDA ALI MUSTAFA HALALSHEH
YAHIA ALI SA'D ALKHALAYLEH	.
HUSSIEN HAMDAN DABWAN AL-DEEKY	Omar Al Hattamleh, Abdulla Sharo’ Laith Abu Shanab, Hussein Aldeeky, Reyad Al Dwairi. (2023)" Effect of the Quasi Rate of Loading in Particle Crushing and Engineering Properties of Black Tough Sand." Acta Montanistica Slovaca. (accepted) 1-Sharo, Abdulla A., Samer R. Rabab'ah, Mohammad O. Taamneh, Hussein Aldeeky, Haneen Al Akhrass. (2022) "Mathematical Modelling for Predicting Thermal Properties of Selected Limestone" Buildings. 12(12): 2063. https://doi.org/10.3390/buildings12122063 2-Samer Rababah, Hussein Aldeeky, Hisham Qasrawi, Omar Al Hattamleh. (2022) "Performance of subgrade soil stabilised with by-product recycled mill scale and cementitous materials". International Journal of Pavement Engineering. 23:3, pp 708-718, https://doi.org/10.1080/10298436.2020.1766686 3- Samer Rabab’ah, Omar Al Hattamleh, Hussein Aldeeky, Bilal Abu Alfoul. (2021) "Effect of glass fiber on the properties of expansive soil and its utilization as subgrade reinforcement in pavement applications." Case Studies in Construction Materials. 14(2021), https://doi.org/10.1016/j.cscm.2020.e00485 4-Hussein Aldeeky, Omar Al Hattamleh& Samar Rababeh. (2020)." Assessing the uniaxial compressive strength and tangent Young’s modulus of basalt rock using the Leeb rebound hardness test". Materiales de Construcci?n. Vol. 70(340), e230 https://doi.org/10.3989/mc.2020.15119 5-Omar Al Hattamleh, Hussein Aldeeky, Samar Rabab’ah, Madhar Taamneh. (2020)" The effect of Dead Sea salt solution on the engineering properties of expansive subgrade clayey soil. Arabian Journal of Geosciences. volume13 (405). https://doi.org/10.1007/s12517-020-05364-0 6-Wasim Barham, Samer Rababah, Hussein Aldeeky, Omar Al Hattamleh. (2020)"Mechanical and Physical Based Artificial Neural Network Models for the Prediction of the Unconfined Compressive Strength of Rock", Geotechnical and Geological Engineering. 38 (5), 4779–4792 https://doi.org/10.1007/s10706-020-01327-0(0123456789().,-volV () 0123458697 7-Samar Rababah, Omar Al Hattamleh, Hussein Aldeeky, Mohammad Aljarrah, Husam AlQablan (2020)" Resilient Response and Permanent Strain of Subgrade Soil Stabilized with by Product Recycled Steel and Cementitious Materials"", ASCE's Journal of Materials in Civil Engineering. volume 32(6), 04020139, https://doi: 10.1061/(ASCE)MT.1943-5533.0003211. 8-Omar Al Hattamleh, Samer Rabab’Ah, Hussein Aldeeky & Husam Al Qablan (2020)" Evaluating Aqaba marine sand geotextile interface shear strength". International Journal of Geotechnical Engineering, volume 14(5), 545–556. https://doi: 10.1080/19386362.2019.1651985 9-Omar Al Hattamleh, Samer Rababeh, Hussien Aldeeky, Hazim Dwairi (2020) " Effect of Compaction States in Compressive Strength and Volume Change of Elastic Silts Modified by Discontinuous Synthetic Fiber". ARPN Journal of Engineering and Applied Sciences,15(21), PP.2431-2443 10-Bilal Abu Alfoul ,Omar AlHattamleh, Hussein Aldeeky (2019) " Investigating the effects of Disc Shaped Thumb Tacks as A “Fiber” Reinforcement on Various Concrete Properties". Case Studies in Construction Materials. 11(2019) https://doi.org/10.1016/j.cscm.2019.e00257 11- Hussein Aldeeky, Omar Al Hattamleh (2018) "Prediction of Engineering Properties of Basalt Rock in Jordan Using Ultrasonic Pulse Velocity Test ". Geotechnical and Geological Engineering. 36(6), PP 3511–3525, https://doi: 10.1007/s10706-018-0551-6. 12-Hussein Aldeeky, Omar Al Hattamleh (2017)'' Experimental study on the utilization of Fine Steel Slag on Stabilizing High Plastic Subgrade Soil''. Advances in Civil Engineering, Volume 2017 (2017), Article ID 9230279, 11 pages; https://doi.org/10.1155/2017/9230279. 13-Hussein Aldeeky, Omar Al Hattamleh, Bilal Abu Alfoul (2016).'' Effect of Sand Placement Method on the Interface Friction of Sand and Geotextile''. International Journal of Civil Engineering, 14(2), PP133-138 https://doi: 10.1007/s40999-016-0019-0. 14-Omar H. Al-Hattamleh, Odeh A. Odeh, Hussein Aldeeky, M.N. Akhtar (2015) ''Characterizations of Soil Collapsibility: Effect of Salts Dilution'' Journal of Materials and Engineering Structures, 2, pp 33–43. 15- Omar H. Al Hattamleh, Hussein H. Aldeeky, Mohammad N. Akhtar. (2013). '' The Consequence of Particle Crushing in Engineering Properties of Granular Materials'' International Journal of Geosciences, 4, pp 1055-1060. https://doi: 10.4236/ijg.2013.47099. 16- Ahmed Shlash Alawneh, Abdallah., I. Hussein Malkawi, Hussein Aldeeky. (1999) ''Tension Tests on Smooth and Rough Model Piles in dry Sand''. Canadian Geotechnical Journal, 36(4): pp 746-753. https:// doi.org/10.1139/t98-104.
ODEY HASAN FAROUQ ALSHBOUL	• Al-Shboul, K. F., Almasabha, G., Shehadeh, A., & Alshboul, O. (2023). Exploring the efficacy of machine learning models for predicting soil radon exhalation rates. Stochastic Environmental Research and Risk Assessment, 37(11), 4307-4321. https://doi.org/10.1007/s00477-023-02509-x • Shehadeh, A., Alshboul, O., & Almasabha, G. (2024). Slope displacement detection in construction: An automated management algorithm for disaster prevention. Expert Systems with Applications, 237, 121505. https://doi.org/https://doi.org/10.1016/j.eswa.2023.121505 • Alshboul, O., Almasabha, G., Al-Shboul, K. F., & Shehadeh, A. (2023). A comparative study of shear strength prediction models for SFRC deep beams without stirrups using Machine learning algorithms. Structures, 55, 97-111. https://doi.org/https://doi.org/10.1016/j.istruc.2023.06.026 • Almasabha, G., Al-Shboul, K. F., Shehadeh, A., & Alshboul, O. (2023). Machine learning-based models for predicting the shear strength of synthetic fiber reinforced concrete beams without stirrups. Structures, 52, 299-311. https://doi.org/https://doi.org/10.1016/j.istruc.2023.03.170 Alshboul, O., A. Shehadeh, and O. Hamedat, Governmental Investment Impacts on the Construction Sector Considering the Liquidity Trap. Journal of Management in Engineering, 2022. 38(2): p. 04021099 DOI: 10.1061/(ASCE)ME.1943-5479.0001003. • Shehadeh, A., O. Alshboul, and O. Hamedat, Risk Assessment Model for Optimal Gain-Pain Share Ratio in Target Cost Contract for Construction Projects. Journal of Construction Engineering and Management, 2022. 148(2): p. 04021197 DOI: 10.1061/(ASCE)CO.1943-7862.0002222. • Shehadeh, A., O. Alshboul, R.E. Al Mamlook, and O. Hamedat, Machine learning models for predicting the residual value of heavy construction equipment: An evaluation of modified decision tree, LightGBM, and XGBoost regression. Automation in Construction, 2021. 129: p. 103827 DOI: https://doi.org/10.1016/j.autcon.2021.103827. • Alshboul, O., A. Shehadeh, M. Al-Kasasbeh, R.E. Al Mamlook, N. Halalsheh, and M. Alkasasbeh, Deep and machine learning approaches for forecasting the residual value of heavy construction equipment: a management decision support model. Engineering, Construction and Architectural Management, 2021. DOI: 10.1108/ECAM-08-2020-0614. • Rami H. Haddad, Odey Alshbuol, Production of geopolymer concrete using natural pozzolan: A parametric study, Construction and Building Materials, 114 (1), 2016, 699-707. https://doi.org/10.1016/j.conbuildmat.2016.04.011 • Shehadeh, A., O. Alshboul, O. Tatari, M.A. Alzubaidi, and A. Hamed El-Sayed Salama, Selection of heavy machinery for earthwork activities: A multi-objective optimization approach using a genetic algorithm. Alexandria Engineering Journal, 2022. 61(10): p. 7555-7569 DOI: https://doi.org/10.1016/j.aej.2022.01.010. • Alshboul, O., A. Shehadeh, and O. Hamedat, Development of integrated asset management model for highway facilities based on risk evaluation. International Journal of Construction Management, 2021: p. 1-10 DOI: 10.1080/15623599.2021.1972204. • Shehadeh, A., O. Alshboul, and O. Hamedat, A Gaussian mixture model evaluation of construction companies’ business acceptance capabilities in performing construction and maintenance activities during COVID-19 pandemic. International Journal of Management Science and Engineering Management, 2021: p. 1-11 DOI: 10.1080/17509653.2021.1991851. • Alshboul, O., A. Shehadeh, O. Tatari, G. Almasabha, and E. Saleh, Multiobjective and multivariable optimization for earthmoving equipment. Journal of Facilities Management, 2022. DOI: 10.1108/JFM-10-2021-0129. • Maha Alkasasbeh, Hosam Olimat, Osama Abudayyeh, Odey Alshboul, & Ali Shehadeh (2021): DEA-based multi-criteria selection model and framework for design-build contracting, International Journal of Management Science and Engineering Management, DOI: 10.1080/17509653.2021.1982422. • Alshboul, O., M.A. Alzubaidi, R.E.A. Mamlook, G. Almasabha, A.S. Almuflih, and A. Shehadeh, Forecasting Liquidated Damages via Machine Learning-Based Modified Regression Models for Highway Construction Projects. Sustainability, 2022. 14(10): p. 5835; https://doi.org/10.3390/su14105835. • Alshboul, O., A. Shehadeh, G. Almasabha, and A.S. Almuflih, Extreme Gradient Boosting-Based Machine Learning Approach for Green Building Cost Prediction. Sustainability, 2022. 14(11): p. 6651 DOI: https://doi.org/10.3390/su14116651. • Alshboul, O., G. Almasabha, A. Shehadeh, O. Al Hattamleh, and A.S. Almuflih, Optimization of the Structural Performance of Buried Reinforced Concrete Pipelines in Cohesionless Soils. Materials, 2022. 15(12): p. 405; https://doi.org/10.3390/ma15124051. • Alshboul, O., G. Almasabha, A. Shehadeh, R.E.A. Mamlook, A.S. Almuflih, and N. Almakayeel, Machine Learning-Based Model for Predicting the Shear Strength of Slender Reinforced Concrete Beams without Stirrups. Buildings, 2022. 12(8): p. 1166; https://doi.org/10.3390/buildings12081166. • Alshboul, O., A. Shehadeh, R.E.A. Mamlook, G. Almasabha, A.S. Almuflih, and S.Y. Alghamdi, Prediction Liquidated Damages via Ensemble Machine Learning Model: Towards Sustainable Highway Construction Projects. Sustainability, 2022. 14(15): p. 9303; https://doi.org/10.3390/su14159303. • Alshboul, O., A. Shehadeh, G. Almasabha, R.E.A. Mamlook, and A.S. Almuflih, Evaluating the Impact of External Support on Green Building Construction Cost: A Hybrid Mathematical and Machine Learning Prediction Approach. Buildings, 2022. 12(8): p. 1256; https://doi.org/10.3390/buildings12081256. • Almasabha, G., O. Alshboul, A. Shehadeh, and A.S. Almuflih, Machine Learning Algorithm for Shear Strength Prediction of Short Links for Steel Buildings. Buildings, 2022. 12(6): p. 775; https://doi.org/10.3390/buildings12060775. • Halalsheh, N., O. Alshboul, A. Shehadeh, R.E. Al Mamlook, A. Al-Othman, M. Tawalbeh, A. Saeed Almuflih, and C. Papelis, Breakthrough Curves Prediction of Selenite Adsorption on Chemically Modified Zeolite Using Boosted Decision Tree Algorithms for Water Treatment Applications. Water, 2022. 14(16): p. 2519; https://doi.org/10.3390/w14162519. • I. M. Almadi, A., R.E. Al Mamlook, I. Ullah, O. Alshboul, N. Bandara, and A. Shehadeh, Vehicle collisions analysis on highways based on multi-user driving simulator and multinomial logistic regression model on US highways in Michigan. International Journal of Crashworthiness, 2022: p. 1-16 DOI: 10.1080/13588265.2022.2130608 • Shehadeh A, Alshboul O, Alsmadi D. REINFORCING THE PROCESS OF TOTAL QUALITY MANAGEMENT OF STUDENTS LEARNING OUTCOMES ASSESSMENT: AN ADVANCED DIPLOMA COMPLEMENTS FOR ENGINEERING EDUCATIONAL PROGRAMS. Abstracts & Proceedings of ADVED 2022- 8th International Conference on Advances in Education, 10-12 October 2022. https://doi.org/10.47696/adved.202241 • Alshboul O, Shehadeh A. MODERNIZATION OF CAPSTONE DESIGN COURSES FOR ENGINEERING STUDENTS: ECHOES OF SURVEY OUTCOMES ANALYSIS. Abstracts & Proceedings of ADVED 2022- 8th International Conference on Advances in Education, 10-12 October 2022. DOI: https://doi.org/10.47696/adved.202242
AHMAD NAWAF ABDELHAMID TARAWNEH	• Tarawneh, A.N., Saleh, E.F., Alghossoon, A.M., Almasabha, G.S., Alajarmeh, O.S., Manalo, A. and Benmokrane, B., 2024. Modified Shear Design Model for Steel-and Fiber-Reinforced Polymer-Reinforced Concrete Beams. ACI Structural Journal, 121(1), pp.147-158. • Tarawneh, A., Alajarmeh, O., Alawadi, R., Amirah, H. and Alramadeen, R., 2024. Database evaluation and reliability calibration for flexural strength of hybrid FRP/steel-RC Beams. Composite Structures, 329, p.117758. • Alghossoon, A., Tarawneh, A., Hatamleh, M. and Alhusban, M., 2024. Generalizing AISC360–22's high-strength CFT member design equations for economical and safety-enhanced design. Journal of Constructional Steel Research, 215, p.108541. • Tarawneh, A., Saleh, E., Alghossoon, A. and Naser, M.Z., 2023. Proposing a one-way shear design model for FRP-RC members: Evaluation and reliability calibration. Engineering Structures, 292, p.116527. • Tarawneh, A., Almasabha, G., Saleh, E., Alghossoon, A. and Alajarmeh, O., 2023, November. Data-driven machine learning methodology for designing slender FRP-RC columns. In Structures (Vol. 57, p. 105207). Elsevier. • Alajarmeh, O., Manalo, A., Ferdous, W., Almasabha, G., Tarawneh, A., Awwad, K.E., Safonov, A., Zeng, X. and Schubel, P., 2023. Fatigue behavior of unidirectional fiber?reinforced pultruded composites with high volume fiber fraction. Fatigue & Fracture of Engineering Materials & Structures, 46(6), pp.2034-2048. • Saleh, E., Murad, Y., Tarawneh, A., Alghossoon, A. and Almasabha, G., 2024. Automated analysis and design for recycled aggregate reinforced concrete beams. Structural Concrete. • Momani, Y., Alawadi, R., Jweihan, Y.S., Tarawneh, A.N., Al-Kheetan, M.J. and Aldiabat, A., 2024. Machine learning-based evaluation of punching shear resistance for steel/FRP-RC slabs. Ain Shams Engineering Journal, p.102668. • Tarawneh, A., Alawadi, R.J., Almahmood, H., Saleh, E., Al-Asi, A. and Alghossoon, A., 2024. Unified two-way shear model for steel and FRP-RC slabs: Evaluation and reliability calibration. Results in Engineering, 21, p.101790. • Alghossoon, A., Tarawneh, A., Almasabha, G., Murad, Y., Saleh, E. and Sahawneh, H., 2023. Shear strength of circular concrete-filled tube (CCFT) members using human-guided artificial intelligence approach. Engineering Structures, 282, p.115820. • Tarawneh, A., Saleh, E., Almasabha, G. and Alghossoon, A., 2023. Hybrid Data-Driven Machine Learning Framework for Determining Prestressed Concrete Losses. Arabian Journal for Science and Engineering, pp.1-15. • Almomani, Y., Tarawneh, A., Alawadi, R., Taqieddin, Z.N., Taha, S., Sheikh, N.A. and Momani, Z., 2023. Confinement model for circular concrete columns transversely reinforced with GFRP spirals and hoops. Results in Engineering, 17, p.100918. • Dwairi, H.M., Tarawneh, A.N. and Saleh, E.F., 2023. Prediction of inelastic displacement demand for SDOF structures built on firm soils under near-and far-fault records using neural networks. Innovative Infrastructure Solutions, 8(1), p.55. • Momani, Y., Alawadi, R., Majdalaweyh, S., Tarawneh, A. and Jweihan, Y.S., 2022. Data-driven machine learning prediction models for the tensile capacity of anchors in thin concrete. Innovative Infrastructure Solutions, 7(5), pp.1-13. • Saleh, E., Tarawneh, A.N. and Naser, M.Z., 2022. Failure mode classification and deformability evaluation for concrete beams reinforced with FRP bars. Composite Structures, 292, p.115651. • Tarawneh, A., Saleh, E., Murad, Y., 2022. ColumnsNet: Neural Network Model for Constructing Interaction Diagrams and Slenderness Limit for FRP-RC Columns. Journal of Structural Engineering,148(8), p. 04022089. • Saleh, E., Tarawneh, A., Alghossoon, A., 2022. A critical assessment of existing prediction models on the shear capacity of recycled aggregate concrete beams. Innovative Infrastructure Solutions, 7(239), pp.1-17 • Saleh, E., Alghossoon, A., Tarawneh, A., 2022, June. Optimal allocation of material and slenderness limits for the rectangular concrete-filled columns. Journal of Constructional Steel Research, 334, p. 107283. • Tarawneh, A.N., Saleh, E., Dwairi, H.M. and Majdalaweyh, S.A., 2022, June. Design and strength reduction factors calibration of adhesive anchors embedded in thin concrete members. In Structures (Vol. 40, pp. 213-222). Elsevier. • Saleh, E.F., Tarawneh, A.N. and Katkhuda, H.N., 2022. A comprehensive evaluation of existing and new model-identification approaches for non-destructive concrete strength assessment. Construction and Building Materials, 334, p.127447. • Tarawneh, A.N., Saleh, E.F. and Majdalaweyh, S.A., 2022. Reliability Assessment and Strength Reduction Factor Calibration for Screw Anchors Concrete Breakout. ACI Structural Journal, 119(2), pp.113-122. • Saleh, E., Tarawneh, A., Naser, M. Z., Abedi, M., & Almasabha, G. (2022). You only design once (YODO): Gaussian Process-Batch Bayesian optimization framework for mixture design of ultra-high performance concrete. Construction and Building Materials, 330, 127270. • Almasabha, G., Tarawneh, A., Saleh, E. and Alajarmeh, O., 2022. Data-Driven Flexural Stiffness Model of FRP-Reinforced Concrete Slender Columns. Journal of Composites for Construction, 26(3), p.04022024. • Saleh, E., Tarawneh, A., Almasabha, G. and Momani, Y., 2022, April. Slenderness limit of FRP-confined rectangular concrete columns. In Structures (Vol. 38, pp. 435-447). Elsevier. • Saleh, E., Tarawneh, A., Dwairi, H., and AlHamaydeh, M., 2022. Guide to non-destructive concrete strength assessment: Homogeneity tests and sampling plans. Journal of Building Engineering, p.104047. • Momani, Y., Tarawneh, A., Alawadi, R. and Momani, Z., 2022. Shear strength prediction of steel fiber-reinforced concrete beams without stirrups. Innovative Infrastructure Solutions, 7(1), pp.1-15. • Dwairi, H.M. and Tarawneh, A.N., 2022. Artificial neural networks prediction of inelastic displacement demands for structures built on soft soils. Innovative Infrastructure Solutions, 7(1), pp.1-15. • Tarawneh, A., Majdalaweyh, S. and Dwairi, H., 2021, October. Equivalent viscous damping of steel members for direct displacement based design. In Structures (Vol. 33, pp. 4781-4790). Elsevier. • Tarawneh, A.N., Dwairi, H.M., Almasabha, G.S. and Majdalaweyh, S.A., 2021. Effect of Fiber-Reinforced Polymer-Compression Reinforcement in Columns Subjected to Concentric and Eccentric Loading. ACI Structural Journal, 118(3). • Tarawneh, A., Almasabha, G., Alawadi, R. and Tarawneh, M., 2021, August. Innovative and reliable model for shear strength of steel fibers reinforced concrete beams. In Structures (Vol. 32, pp. 1015-1025). Elsevier. • Murad, Y., Tarawneh, A., Arar, F., Al-Zu'bi, A., Al-Ghwairi, A., Al-Jaafreh, A., and Tarawneh, M., 2021, October. Flexural strength prediction for concrete beams reinforced with FRP bars using gene expression programming. In Structures (Vol. 33, pp. 3163-3172). Elsevier. • Tarawneh, A. and Majdalaweyh, S., 2020, December. Design and reliability analysis of FRP-reinforced concrete columns. In Structures (Vol. 28, pp. 1580-1588). Elsevier. • Tarawneh, A., Momani, Y. and Alawadi, R., 2021, August. Leveraging artificial intelligence for more accurate and reliable predictions of anchors shear breakout capacity in thin concrete members. In Structures (Vol. 32, pp. 1005-1014). Elsevier. • Tarawneh, A. and Majdalaweyh, S., 2020, December. Design and reliability analysis of FRP-reinforced concrete columns. In Structures (Vol. 28, pp. 1580-1588). Elsevier. • Tarawneh, Ahmad N., Brandon E. Ross, and Thomas E. Cousins. "Tensile Behavior and Design of Screw Anchors in Thin Concrete Members." ACI Structural Journal 117.1 (2020). • Tarawneh, Ahmad N., Brandon E. Ross, and Thomas E. Cousins. " Shear Behavior and Design of Post-Installed Anchors in Thin Concrete Members." ACI Structural Journal, 117(3), pp.311-322. • Tarawneh, A.N., Ross, B.E. and Cousins, T.E., 2020. Tensile behavior and design of adhesive anchors embedded in thin concrete members. PCI Journal, 65(5). • Tarawneh, A, Majdalaweyh, S., Mahasneh, B. "The Effect of Using Hysteresis Models (Bilinear and Modified Clough) on Seismic Demands of Single Degree of Freedom Systems" American Journal of Applied Sciences, Vol, 13. DOI: 10.3844/ajassp.2016.913.923.
HEND HUSSIEN ALI AL-SHATNAWI	Bandini, P., and Al Shatnawi, H.H. (2017). "Discussion of ‘Fines Classification Based on Sensitivity to Pore-Fluid Chemistry’ by Junbong Jang and J. Carlos Santamarina." J. Geotechnical and Geoenvironmental Engineering, 143(7):07017011, doi: 10.1061/(ASCE)GT.1943-5606.0001692. Al Shatnawi, H. and Bandini, P. (2018). "Limitations of classifications for soils that contain diatom microfossils." In A.W. Stuedlein, A. Lemnitzer, and M.T. Suleiman (Eds.), IFCEE 2018: Advances in Geomaterial Modeling and Site Characterization. Geotechnical Special Publication 295. Reston, Virginia, 123-132, doi: 10.1061/9780784481585. Al Shatnawi, H. and Bandini, P. (2019). "Oedometric behavior of a diatom-kaolin mixture." Proc. Geo-Congress 2019: Eighth International Conference on Case Histories in Geotechnical Engineering, Philadelphia, March 2019.
GHASSAN SULAIMAN ODEH ALMASABHA	1. Tarawneh A, Saleh E., Alghossoon A, Almasabha G., Alajarmeh, O, Manalo, and Benmokrane, B. (2024), “Modified Shear Design Model for Steel- and Fiber- Reinforced Polymer-Reinforced Concrete Beams,” ACI Structural Journal, V. 121, No. 1. https://doi.org/10.14359/51739191 2. Shehadeh A., Alshboul O., and Almasabha, G. (2024), “Slope displacement detection in construction: An automated management algorithm for disaster prevention”, Expert Systems with Applications, V. 237, Part B, 121505. https://doi.org/10.1016/j.eswa.2023.121505 3. Almasabha, G. and Chao, S.-H. (2023), “Modified Shear Design Model for Steel and FRP-Reinforced Concrete Beams,” ACI Structural Journal, V. 120, No. 1. https://doi.org/10.14359/51737144 4. Saleh E, Murad Y, Tarawneh A, Alghossoon A, Almasabha G. (2023) “Automated analysis and design for recycled aggregate reinforced concrete beams”, Structural Concrete. https://doi.org/10.1002/suco. 202300354 5. Almasabha, G., Al-Mazaidh, R. (2023), “Simple Truss Model to Estimate the Shear Strength of Short Links in the Eccentrically Braced Frame (EBF) Steel System”, Journal of Thin-Walled Structures, Volume 188, 110811, 1-15, https://doi.org/10.1016/j.tws.2023.110811. 6. Chao, S.-H., Almasabha, G., Price, B., and Jiansinlapadamrong, C., (2023), “A Horizontal Stiffener Detailing for Shear Links at the Link-to-Column Connection in Eccentrically Braced Frames,” ASCE Journal of Structural Engineering, Vol. 149, Issue 9. https://doi.org/10.1061/JSENDH.STENG-12090 7. Almasabha, G. and Chao, S.-H. (2023), “A New Reinforcement Configuration for Achieving High-Ductility and High-Strength Rectangular Squat Structural Walls,” ACI Structural Journal, V. 120, No. 1. https://doi.org/10.14359/51737144 8. Almasabha, G., Al-Shboul K., Shehadeh A., Alshboul O., (2023), “Machine Learning-Based Models for Predicting the Shear Strength of Synthetic Fiber Reinforced Concrete Beams without Stirrups”, Structures, V. 52, 299-311. https://doi.org/10.1016/j.istruc.2023.03.170 9. Almasabha, G., Shehadeh, A., Alshboul, O. and Al Hattamleh, O. (2023), "Structural performance of buried reinforced concrete pipelines under deep embankment soil", Construction Innovation, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1108/CI-10-2021-0196 10. Maabreh, M., Almasabha, G. Machine Learning Regression Algorithms for Shear Strength Prediction of SFRC-DBs: Performance Evaluation and Comparisons. Arab J Sci Eng (2023). https://doi.org/10.1007/s13369-023-08176-y 11. Tarawneh A., Almasabha, G., Saleh E., Alghossoon, A., Alajarmeh O. (2023) “Data-driven machine learning methodology for designing slender FRP-RC columns”, Structures, 57, 1-14. https://doi.org/10.1016/j.istruc.2023.105207 12. Alshboul O., Almasabha, G., Al-Shboul K., Shehadeh A., (2023), “A comparative study of shear strength prediction models for SFRC deep beams without stirrups using Machine learning algorithms”, Structures, V. 55, 97-111. https://doi.org/10.1016/j.istruc.2023.06.026 13. Alajarmeh, O, Manalo, A, Ferdous, W, Almasabha, G, Tarawneh, A, Awwad, K, Safonov, A, Zeng, X, Schubel, P. Fatigue behavior of unidirectional fiber-reinforced pultruded composites with high volume fiber fraction. Fatigue Fract Eng Mater Struct. 2023; 1- 15. doi:10.1111/ffe.13979 14. Almasabha, G.; Murad, Y.; Alghossoon, A.; Saleh, E.; Tarawneh, A. Sustainability of Using Steel Fibers in Reinforced Concrete Deep Beams without Stirrups. Sustainability 2023, 15, 4721. https://doi.org/10.3390/su15064721 15. Tarawneh, A.; Saleh, E.; Almasabha, G. and Alghossoon, A. (2023) “Hybrid Data-Driven Machine Learning Framework for Determining Prestressed Concrete Losses”. Arab J Sci Eng. https://doi.org/10.1007/s13369-023-07714-y 16. Al-Shboul K., Almasabha, G., Shehadeh A., Alshboul O., (2023), “Exploring the efficacy of machine learning models for predicting soil radon exhalation rates”, Stochastic Environmental Research and Risk Assessment. https://doi.org/10.1007/s00477-023-02509-x 17. Alghossoon, A.; Tarawneh, A.; Almasabha, G.; Murad, Y.; Saleh, E.; Abu yahia H.; Abu yahia A.; Sahawneh, H. (2023) ” Shear strength of circular concrete-filled tube (CCFT) members using human-guided artificial intelligence approach”. Engineering Structures, V. 282, 115820. https://doi.org/10.1016/j.engstruct.2023.115820 18. Murad, Y.; Saleh, E.; Tarawneh, A.; Almasabha, G.; Alghossoon, A. Shear Strength Prediction of Concrete Beams Reinforced with FRP Bars and Stirrups Using Gene Expression Programming. Sustainability 2023, 15, 6335. https://doi.org/10.3390/su15086335 19. Tarawneh, A.; Alghossoon, A.; Saleh, E.; Almasabha, G.; Murad, Y.; Abu-Rayyan, M.; Aldiabat, A. Machine Learning Prediction Model for Shear Capacity of FRP-RC Slender and Deep Beams. Sustainability 2022, 14, 15609. https://doi.org/10.3390/ su142315609 20. Alshboul, O.; Shehadeh, A.; Almasabha, G.; Mamlook, R.E.A.; Almuflih, A.S. Evaluating the Impact of External Support on Green Building Construction Cost: A Hybrid Mathematical and Machine Learning Prediction Approach. Buildings 2022, 12, 1256. https:// doi.org/10.3390/buildings12081256 21. Alshboul, O.; Almasabha, G.; Shehadeh, A.; Mamlook, R.E.A.; Almuflih, A.S.; Almakayeel, N. Machine Learning-Based Model for Predicting the Shear Strength of Slender Reinforced Concrete Beams without Stirrups. Buildings 2022, 12, 1166. https://doi.org/10.3390/buildings12081166 22. Alshboul, O.; Shehadeh, A.; Mamlook, R.E.A.; Almasabha, G.; Almuflih, A.S.; Alghamdi, S.Y. Prediction Liquidated Damages via Ensemble Machine Learning Model: Towards Sustainable Highway Construction Projects. Sustainability 2022, 14(15), 9303. https://doi.org/ 10.3390/su14159303 23. Alshboul, O.; Almasabha, G.; Shehadeh, A.; Al Hattamleh, O.; Almuflih, A.S. Optimization of the Structural Performance of Buried Reinforced Concrete Pipelines in Cohesionless Soils. Materials 2022, 15, 4051. https://doi.org/10.3390/ma15124051 24. Almasabha, G.; Alshboul, O.; Shehadeh, A.; Almuflih, A.S. Machine Learning Algorithm for Shear Strength Prediction of Short Links for Steel Buildings. Buildings 2022, 12, 775. https://doi.org/ 10.3390/buildings12060775 25. Alshboul O, Shehadeh A., Almasabha G, Almuflih AS, (2022), Extreme Gradient Boosting-Based Machine Learning Approach for Green Building Cost Prediction. Sustainability 14, no. 11: 6651; https://doi.org/10.3390/su14116651 26. Tarawneh A., Almasabha G., Murad Y., (2022). ColumnsNet: Neural Network Model for Constructing Interaction Diagrams and Slenderness Limit for FRP-RC Columns. Journal of Structural Engineering. V. 148. Issue 8. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003389 27. Alshboul O, Alzubaidi MA, Mamlook REA, Almasabha G, Almuflih AS, Shehadeh A. (2022), "Forecasting Liquidated Damages via Machine Learning-Based Modified Regression Models for Highway Construction Projects" Sustainability 14, no. 10: 5835. https://doi.org/10.3390/su14105835 28. Alshboul, O., Shehadeh, A., Tatari, O., Almasabha, G. and Saleh, E. (2022), "Multiobjective and multivariable optimization for earthmoving equipment", Journal of Facilities Management, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1108/JFM-10-2021-0129 29. Saleh E., Tarawneh A., Naser M., Abedi M., Almasabha G., (2022). You only design once (YODO): Gaussian Process-Batch Bayesian optimization framework for mixture design of ultra high performance concrete. Construction and Building Materials. V. 330. https://doi.org/10.1016/j.conbuildmat.2022.127270 30. Almasabha G., Tarawneh A., Saleh E., Alajarmeh O., (2022). Data-Driven Flexural Stiffness Model of FRP-Reinforced Concrete Slender Columns. Journal of Composites for Construction. V. 26. Issue 3. https://doi.org/10.1061/(ASCE)CC.1943-5614.0001218 31. Saleh E., Tarawneh A., Almasabha G., Momani Y., (2022). Slenderness limit of FRP-confined rectangular concrete columns. Structures. V. 38. https://doi.org/10.1016/j.istruc.2022.02.030 32. Almasabha G. (2022). Gene expression model to estimate the overstrength ratio of short links. Structures. V. 37. https://doi.org/10.1016/j.istruc.2022.01.030 33. Tarawneh A., Dwairi H., Almasabha G., and Majdalaweyh S., (2021). Effect of FRP-Compression Reinforcement in Columns Subjected to Concentric and Eccentric Loading. ACI Structural Journal, V. 118, No. 3. https://doi.org/10.14359/51730526 34. Tarawneh A, Almasabha G., Alawadi R., and Tarawneh M., (2021). Innovative and Reliable Model for Shear Strength of Steel Fibers Reinforced Concrete Beams. Structures. V. 32. https://doi.org/10.1016/j.istruc.2021.03.081 35. Shatnawi, A., Almasabha, G., & Tarawneh, B. (2017). Structural behavior of concrete box culverts under deep burial. Journal of Pipeline Systems Engineering and Practice, 8(4) https://doi.org/10.1061/(ASCE)PS.1949-1204.0000291
HAMZA MOHAMMAD ABD- ALKREEM ALKUIME	Journal Publications • Alkuime, H., Kassem, E. Comprehensive evaluation of wheel-tracking rutting performance assessment tests. Int. J. Pavement Res. Technol. 13, 334–347 (2020). https://doi.org/10.1007/s42947-020-0265-z Journal Papers Accepted • Alkuime, H., Kassem, E., Bayomy, F. & Nielsen, R. Development of a new performance indicator to evaluate the resistance of asphalt mixes to intermediate temperature cracking. Journal of Transportation Engineering, Part B: Pavements (2020). Conference Papers (Peer-Reviewed) • Alkuime, H., Kassem, E. & Bayomy, F. M., “Smart Asphalt Mix Design Approach for Sustainable Asphalt Pavement,” Proceedings of the Eighth Jordan International Civil Engineering Conference (JICEC8), (Accepted) • Alkuime, H., Tousif, F., Kassem, E. & Bayomy, F. M. “Comprehensive Evaluation of Various Performance Indicators used for Cracking Performance Assessment of Asphalt Mixtures,”. Proceedings of Transportation Research Board (2020). • Chowdhury, R., Kassem, E., Alkuime, H. & Bayomy, F. M. “Resilient Modulus Prediction Model of Unbound Coarse Materials,”. Proceedings of Transportation Research Board (2019). Research Reports • Kassem, E. Bayomy, F. M, Jung. SJ, Alkuime, H, & Tousif, F., Development and Evaluation of Performance Measures to Augment Asphalt Mix Design in Idaho,” (2019) ( Completed) Other Publications: • Alkuime, H, “Innovative Assessment Tests and Indicators for Performance-Based Asphalt Mix Design” Ph.D. Dissertation, University of Idaho, Moscow, ID, USA, December 2019 • Alkuime, H, “Trip Attraction Model for Universities in Jordan” M.Sc. Dissertation, Jordan University of Science and Technology, Irbid, Jordan, August 2015. Presentations: • “Development and Evaluation of Performance Measures to Augment Asphalt Mix Design in Idaho,” Idaho Asphalt conference, 2019.
MOHAMMAD SAMAIR DAKHIL ALMASHAQBEH
MAI ABD-ALRHMAN IZZAT ALJABERI	Evaluation of Stability Resistance Factor for Slender Concrete Columns Internally Reinforced with Fiber-Reinforced Polymer Bars
ABDULLAH MOHMMAD ABDULLAH AL-GHOSSOON	Abdullah Alghossoon, Ahmad Tarawneh, Muhammad Hatamleh, Mohammad Alhusban, Generalizing AISC360–22's high-strength CFT member design equations for economical and safety-enhanced design, Journal of Constructional Steel Research, Volume 215, 2024, 108541, ISSN 0143-974X, https://doi.org/10.1016/j.jcsr.2024.108541. Abdullah Alghossoon, Amit Varma, "Beam-column behavior and design equations for high-strength composite filled tube (CFT) members: Investigating the interaction between section and member slenderness ratio", Journal of Building Engineering, Volume 80,2023,107943,ISSN 2352-7102,https://doi.org/10.1016/j.jobe.2023.107943. A. Alghossoon et al., “Shear strength of circular concrete-filled tube (CCFT) members using human-guided artificial intelligence approach,” Eng. Struct., vol. 282, p. 115820, May 2023. A. Alghossoon and A. Varma, “Rectangular filled composite members made from high strength materials: Behavior and design of columns and beams,” Thin-Walled Struct., vol. 185, p. 110641, Apr. 2023. A. Alghossoon and A. H. Varma, “Fiber-based model for simulating strength and stiffness deterioration of high-strength steel beams,” Thin-Walled Struct., vol. 183, p. 110432, Feb. 2023. E. Saleh, A. Alghossoon, and A. Tarawneh, “Optimal allocation of material and slenderness limits for the rectangular concrete-filled columns,” J. Constr. Steel Res., vol. 193, p. 107283, Jun. 2022. Tarawneh, A N; Saleh, E F; Alghossoon, A M; Almasabha, G S; Alajarmeh, O S; et al.? Modified Shear Design Model for Steel- and Fiber- Reinforced Polymer-Reinforced Concrete Beams, ACI Structural Journal; Farmington Hills Vol. 121, Iss. 1, (Jan 2024): 147-158. DOI:10.14359/51739191 Ahmad Tarawneh, Roaa J. Alawadi, Hanady Almahmood, Eman Saleh, Aya Al-Asi, Abdullah Alghossoon, Unified two-way shear model for steel and FRP-RC slabs: Evaluation and reliability calibration, Results in Engineering, Volume 21, 2024, 101790, ISSN 2590-1230, https://doi.org/10.1016/j.rineng.2024.101790. Ahmad Tarawneh, Eman Saleh, Abdullah Alghossoon, M.Z. Naser,"Proposing a one-way shear design model for FRP-RC members: Evaluation and reliability calibration, Engineering Structures",Volume 292,2023,116527,ISSN 0141-0296,https://doi.org/10.1016/j.engstruct.2023.116527. A. Tarawneh, E. Saleh, G. Almasabha, and A. Alghossoon, “Hybrid Data-Driven Machine Learning Framework for Determining Prestressed Concrete Losses,” Arab. J. Sci. Eng., 2023. Ahmad Tarawneh, Ghassan Almasabha, Eman Saleh, Abdullah Alghossoon, Omar Alajarmeh,"Data-driven machine learning methodology for designing slender FRP-RC columns, Structures",Volume 57,2023,105207,ISSN 2352-0124,https://doi.org/10.1016/j.istruc.2023.105207. A. Tarawneh et al., “Machine Learning Prediction Model for Shear Capacity of FRP-RC Slender and Deep Beams,” Sustain., vol. 14, no. 23, Dec. 2022. Y. Murad, E. Saleh, A. Tarawneh, G. Almasabha, and A. Alghossoon, “Shear Strength Prediction of Concrete Beams Reinforced with FRP Bars and Stirrups Using Gene Expression Programming,” Sustain. 2023, Vol. 15, Page 6335, vol. 15, no. 8, p. 6335, Apr. 2023. A. Tarawneh, E. Saleh, G. Almasabha, and A. Alghossoon, “Hybrid Data-Driven Machine Learning Framework for Determining Prestressed Concrete Losses,” Arab. J. Sci. Eng., pp. 1–15, Mar. 2023. G. Almasabha, Y. Murad, A. Alghossoon, E. Saleh, and A. Tarawneh, “Sustainability of Using Steel Fibers in Reinforced Concrete Deep Beams without Stirrups,” Sustain. 2023, Vol. 15, Page 4721, vol. 15, no. 6, p. 4721, Mar. 2023. A. M. Alghossoon, “ANALYSIS AND DESIGN OF HIGH-STRENGTH STEEL AND COMPOSITE MEMBERS,” 2021. E. Saleh, A. Tarawneh, and A. Alghossoon, “A critical assessment of existing prediction models on the shear capacity of recycled aggregate concrete beams,” Innov. Infrastruct. Solut., vol. 7, no. 4, pp. 1–17, Aug. 2022. Abdullah M. Amit V. (2020). “The interaction of section and member slenderness on the behavior of composite filled tube members”. 2020 SSRC Annual Stability Conference in conjunction with NASCC: The Steel Conference. Atlanta, USA, April 21-24, 2020. Abdullah M. Amit V. (2021). “Effect of local buckling on the behavior of high strength steel beams”. 2021 SSRC Annual Stability Conference in conjunction with NASCC: The Steel Conference. Louisville, Kentucky, USA, April 13-16, 2021.
RA'ED KHALIL MOHAMMAD AL-MAZAIDH	Simple Truss Model to estimate the shear strength of short links in the Eccentrically Braced Frame (EBF) steel system, Thin-Walled Structures,2023.
EMAN FUAD YOUNIS SALEH	@